Bedienungsanleitung Hama 40095 - 5in1 (Seite 5 von 24) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

607815

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Manual code search run

• Turn on the device manually.

• Press the source key (3) (TV, STB, AUX,

VCR, DVD) shortly.

• Hold the key setup (16) pressed for

approx. 3 seconds until the red LED lights

up permanently.

• You press repeatedly the key POWER (1)

after each other (this can be up to 350

times), only at VCR (Video recorders) asks

the key P+ (8) or P- (8)

• to the device that is supposed to be

operated, off, or changes the channel or

reacts correspondingly. The code-search

is begun with the code number currently

stored on the cluster.

• Press shortly OK (10) in order to store the

code. Due to the extensive number of the

different code numbers different codes

are preprogrammed per device type up to

350. In individual cases it is possible that

only the most common primary functions

are available. With some speciﬁ c device

models it can be that the described

procedure does not lead to the success.

Automatic search run

If your device does not respond to the

remote control although you tried out all

codes performed for your device type and the

corresponding brand, you attempt it with the

automatic search run. Through that you can

ﬁ nd also such codes of such brands which

are not performed in the device code list.

• Turn on the device manually

• Press the source key (3) (TV, STB, AUX,

VCR, DVD) shortly.

• Hold the key setup (16) pressed for

approx. 3 seconds until the red LED lights

up permanently.

• Focus the remote control on the device

and press the key P+ (8) once shortly.

• If the device does not have any program-

function, you press the key POWER (1)

instead of the P+ (8).

• The remote control starts the code

search after 6 seconds and sends in the

1 second’s clock pulse (see also next

section) after each other all codes. At

every sending the red LED lights up.

• As soon as the device reacts to the

remote control, you press OK (10). You

missed it to press OK in time, you keep

up the key P- to return (8) in a step by

step way for the code which the device

reacted to.

• In order to abort the search, you press

EXIT (12).

When the remote control instead of 1 only

every 3 seconds a new code is supposed to

send, you go on as follows.

You press within 6 seconds according to

pressures of the key P+ (8) (and/or POWER

(1)) how in before described, the key P+ (8)

or P- (8) still once. The remote control sends

now a new code only every 3 seconds.

Through that you win more time in order to

abort the process, however, the code search

through that lasts also longer.

According to code search trade name

• This function offers you the possibility, to

search for trade names (see code set).

• Turn on the device manually.

• Press the source key (3) (TV, STB, AUX,

VCR, DVD) shortly.

• Hold the key setup (16) pressed for

approx. 3 seconds until which red LED

lights up permanently.

• Enter the one-digit code according to

following table.

1 Philips

2 Sony, Panasonic, JVC, Toshiba

3 Thomson

4 Telefunken

5 Grundig

6 Nokia

0 All other brands for this cluster

• You press the key P+ (8) repeatedly (or at

video recorders the key POWER (1)) or

until the device reacts correspondingly.

Go ahead in this case speedily since

otherwise the automatic code search is

started.

• Store the code from OK (10) through

pressing.

• All codes were searched, the red LED

ﬂ ashes for approx. 3 seconds.

Code-identiﬁ cation

The code identiﬁ cation offers you the

possibility, already to determine entered

codes that are stored in the remote control.

So go ahead.

• Turn on the affecting device manually.

• Press the source key (3) (TV, STB, AUX,

VCR, DVD) shortly.

• Hold the key setup (16) pressed for

approx. 3 seconds until the red LED lights

up permanently.

• You press the key setup (16) shortly,

the red LED goes out shortly during the

keystroke.

• In order to ﬁ nd the ﬁ rst number, you press

the numeric keys from 0 to 9.

• If the red LED goes out shortly, it is the

ﬁ rst stored number.

• In order to ﬁ nd the second number, you

press in turn the numeric keys from 0 to 9

until the red LED goes out.

• Repeat the process for the third and the

fourth number.

• The red LED goes out as soon as the key

was pressed for the fourth number.

• The code-identiﬁ cation is now ﬁ nished.

Normal use

After you have carried out the programming

of your remote control for yours audio/video

device, the remote control works in the most

common primary functions as the original

remote control of the respective device.

Focus your remote control on the wanted

device and press the corresponding source

key. The red LED will light up shortly.

They activate the functions now through

pressing of the corresponding function key of

your universal remote control.

At every keystroke the red LED lights up

shortly.

Possibly every function of your original

remote control is not directly available on the

universal remote control.

In particular near newer devices it is possible

that the functions are ﬁ rst of all put aside or

not at all available among other keys than

expected.

With the AV Taste you choose usually the AV

input of the TV set for e.g. the STB receiver

or the video recorder.

Special functions

„electronic program“

The key EPG (13) corresponds to the function

„Electronic Program Guide“ and has different

functions, depending on which device this

is used.

At STB - or VCR - codes keep you up the

key a programming carry out, provided that

your video recorder about a SHOWVIEW

- function.

00040095bda.indd Abs1:8-Abs1:900040095bda.indd Abs1:8-Abs1:9 11.12.2008 11:59:14 Uhr11.12.2008 11:59:14 Uhr

Hama 40095 - 5in1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info