Bedienungsanleitung Hama 40098 - 8in1 (Seite 6 von 30) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

607816

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

• You should not have also any success in

this way, then you attempt it with that one

„search run automatic in the chapter“

described search method.

Manual code search run

• Turn on the device manually.

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

• Hold the key setup (16) pressed for approx.

3 seconds until the red LED lights up

permanently.

• You press repeatedly the key POWER (1)

after each other (this can be up to 350

times), only at VCR (Video recorders) asks

the key P+ (8) or P- (8)

• to the device that is supposed to be

operated, off, or changes the channel or

reacts correspondingly. The code-search

is begun with the code number currently

stored on the cluster.

• Press shortly OK (10) in order to store the

code. Due to the extensive number of the

different code numbers different codes

are preprogrammed per device type up to

350. In individual cases it is possible that

only the most common primary functions

are available. With some speciﬁ c device

models it can be that the described

procedure does not lead to the success.

Automatic search run

If your device does not respond to the remote

control although you tried out all codes

performed for your device type and the

corresponding brand, you attempt it with the

automatic search run. Through that you

can ﬁ nd also such codes of such brands

which are not performed in the device code

list.

• Turn on the device manually

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

• Hold the key setup (16) pressed for approx.

3 seconds until the red LED lights up

permanently.

• Focus the remote control on the device

and press the key P+ (8) once shortly.

• If the device does not have any

program-function, you press the key

POWER (1) instead of the P+ (8).

• The remote control starts the code

search after 6 seconds and sends in the

1 second’s clock pulse (see also next

section) after each other all codes. At

every sending the red LED lights up.

• As soon as the device reacts to the

remote control, you press OK (10). You

missed it to press OK in time, you keep

up the key P- to return (8) in a step by

step way for the code which the device

reacted to.

• In order to abort the search, you press

EXIT (12).

When the remote control instead of 1 only

every 3 seconds a new code is supposed to

send, you go on as follows.

You press within 6 seconds according

to pressures of the key P+ (8) (and/or POWER

(1)) how in before described, the key P+ (8) or

P- (8) still once. The remote control sends

now a new code only every 3 seconds.

Through that you win more time in order to

abort the process, however, the code search

through that lasts also longer.

According to code search trade name

• This function offers you the possibility, to

search for trade names (see code set).

• Turn on the device manually.

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

• Hold the key setup (16) pressed for approx.

3 seconds until which red LED lights up

permanently.

• Enter the one-digit code according to

following table.

1 Philips

2 Sony, Panasonic, JVC, Toshiba

3 Thomson

4 Telefunken

5 Grundig

6 Nokia

0 All other brands for this cluster

• You press the key P+ (8) repeatedly (or at

video recorders the key POWER (1)) or

until the device reacts correspondingly.

Go ahead in this case speedily since

otherwise the automatic code search is

started.

• Store the code from OK (10) through

pressing.

• All codes were searched, the red LED

ﬂ ashes for approx. 3 seconds.

Code-identiﬁ cation

The code identiﬁ cation offers you the

possibility, already to determine entered

codes that are stored in the remote control.

So go ahead.

• Turn on the device manually.

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

• Hold the key setup (16) pressed for approx.

3 seconds until the red LED lights up

permanently.

• You press the key setup (16) shortly, the

red LED goes out shortly during the

keystroke.

• In order to ﬁ nd the ﬁ rst number, you press

the numeric keys from 0 to 9.

• If the red LED goes out shortly, it is the ﬁ rst

stored number.

• In order to ﬁ nd the second number, you

press in turn the numeric keys from 0 to 9

until the red LED goes out.

• Repeat the process for the third and the

fourth number.

• The red LED goes out as soon as the key

was pressed for the fourth number.

• The code-identiﬁ cation is now ﬁ nished.

Learning codes of another remote control

If the brand of the device to be operated

does not stand in the separate code list, you

can copy the functions of the original remote

control of the device into yours 40098.

According to format of the line codes of

the original remote control your remote

control can store up to 150 keys.

00040098bda.indd Abs1:10-Abs1:1100040098bda.indd Abs1:10-Abs1:11 08.10.2009 10:24:54 Uhr08.10.2009 10:24:54 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 40098 - 8in1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info