Bedienungsanleitung Hama 62763 Wireless LAN (Seite 10 von 14) (Englisch)

607688

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

3.2.2.2 WPA/WPA2 Encryption

Wi-Fi Protected Access (WPA) is an encryption method for WLAN. WPA contains the WEP architecture, but offers additional pro-

tection via dynamic codes, which are based on the Temporal Key Integrity Protocol (TKIP), and also offers pre-shared keys (PSK) or

extensible authentication protocol (EAP) for user authentication. However, a radius server is required for this. WPA2 is a development

of WPA and uses a different encryption algorithm, advanced encryption standard (AES).

WPA offers two types of authentication, either pre-shared key or authentication via special authentication protocols, which are

generally variations of EAP (Extensible Authentication Protocol). An authentication server (RADIUS server) is used for the latter

authentication method, which is rarely used for private applications. Your administrator can give you the information you require to

conﬁ gure this authentication method.

WPA pre-shared-key (recommen-

ded for most users)

First select whether you want to

use WPA with TKIP encryption

algorithm, WPA2 with AES encryp-

tion algorithm or the WPA Mixed

mode. The mixed mode allows

clients using WPA or WPA2 to ac-

cess the access point. The mixture

is very practical as presently few

XP clients are WPA2 compatible. If

the mixed mode is switched off, the

AP only allows WPA2 clients, and

the large number of WPA (TKIP)

devices cannot connect.

Then you must select the key

format (Pre-shared Key Format).

Select either Pass phrase for a key

with a length of at least 8 and max.

63 characters, whereby letters

(A-Z), numbers and punctuation

marks can be used, or Hex for a

64 character key, in which only

numbers from 0-9 and letters from

a-f can be used.

The next step is entering a key,

called a pre-shared-key (PSK). All

clients which are to access the

access point must know this character string.

Click Apply to save your settings. You must then restart the router for the settings to take effect. To do so, click Apply in the next

window. The wireless network with encryption is available after you restart.

WPA RADIUS (requires a special authentication server)

First select whether you want to use WPA with TKIP encryption algorithm, WPA2 with AES encryption algorithm or the WPA Mixed

mode. The mixed mode allows clients using WPA or WPA2 to access the access point. The mixture is very practical as presently few

XP clients are WPA2 compatible.

Select WPA2 (AES) only. The AP only allows WPA2 clients, and the large number of WPA (TKIP) devices cannot connect.

Next enter the RADIUS server IP address. The RADIUS Server Port is preset to 1812. Enter the password for the RADIUS Server.

Click Apply to save your settings. You must then restart the router for the settings to take effect. To do so, click Apply in the next

window. The wireless network with encryption is available after you restart.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 62763 Wireless LAN Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama 62763 Wireless LAN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info