Bedienungsanleitung Hama EWS1000 - 76044 (Seite 7 von 17) (Deutsch, Englisch, Holländisch, Französisch)

607430

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Activating and deactivating the daily alarms

To activate or deactivate the daily alarms, brieﬂy press

the “+” button.

Press 1x: Alarm 1 activated

Press 2x: Alarm 2 activated

Press 3x: Both alarms activated

Press 4x: Both alarms deactivated

Information:

• After eight seconds without a button being pressed,

the clock switches automatically from Setting mode to

normal clock mode.

• The alarm will sound for two minutes if you do not

deactivate it by pressing any button. In this case, the

alarm will be repeated automatically after 24 hours.

Automatic snooze function

• Proceed as follows to activate the automatic snooze

function:

• While the alarm is sounding, press the “Snooze/Light”

button to activate the snooze function. When the

snooze function is active, the “Zz” symbol appears in

the display.

• This operation moves the alarm back by ﬁ ve minutes

and the alarm will restart at this time.

• Pressing any button can interrupt the snooze function.

(except History, Alert, Channel, Memory,

“ /Hpa-inhg & /°C/°F”)+

Setting the temperature alarm

• Press and hold down the “Alert” button for three

seconds until the symbol for the temperature alarm

stars to ﬂ ash.

• Press the “Channel” button to switch between the

different radio channels (CH1, CH2, CH3) (for multiple

sensors within range).

• Press “Alert” to conﬁrm the selected channel.

• The symbol for the upper limit of the temperature

alarm starts to ﬂ ash. Use the arrow keys

“ /Hpa-inhg &/°C/°F” to set the required

maximum temperature.

• Press “Alert” to conﬁrm your setting.

• The symbol for the lower limit of the temperature

alarm starts to ﬂ ash. Use the arrow keys “ /Hpa-inhg

&/°C/°F” to set the required minimum temperature.

• Press “Alert” to conﬁrm your setting and to end the

setting procedure.

Activating and deactivating the temperature alarm

• Brieﬂy press the “Alert” button to activate or

deactivate the temperature alarm for all the channels

of the outdoor sensors.

• Alarm activated: Temperature alarm symbol appears in

display

• Alarm deactivated: temperature alarm symbol

disappears

Information:

• You can set up a temperature alarm for every channel.

• If you set the maximum to a temperature that is lower

than the minimum, then you will not be able to

complete the setting process.

• The minimum must always be at least 1°C below the

maximum.

• When the temperature alarm sounds, the appropriate

channel and the upper or lower limit symbol is shown.

Moon Phase Display

The Moon Phase of each day is shown on the LCD.

A: New Moon B: Waxing Crescent

C: First Quarter D: Waxing Gibbous

E: Full Moon F: Waning Gibbous

G: Last Quarter H: Waning Crescent

Summer time display

The summer time is displayed by the “S” symbol in the

display. The clock works this out using the DCF signal.

°C/°F temperature display

The temperature is displayed either in °C or °F. Brieﬂy

pressing the “/°C/°F” button allows you to switch

between the individual modes.

Temperature trend display

After you inset the batteries, the weather station

measures the current temperature. The trend display

shows a neutral temperature course (horizontal arrow).

The further course of the trend display is determined as

follows:

• If, after an hour, the temperature is more than 1 °C

higher than the value measured ﬁ rst, then a positive

course is displayed (arrow pointing upwards).

• If, after an hour, the temperature is more than 1 °C

lower than the value measured ﬁ rst, then a negative

course is displayed (arrow pointing downwards).

If the temperature does not change within an hour,

then the upward or downward pointing arrow becomes

a horizontal arrow.

The measured temperature is then taken as then neutral

value from which further prognoses are made.

Maximum / Minimum Temperature / relative Humidity

• Brieﬂy press the “Memory” button to display the

maximum / minimum temperature and relative humidity.

After ﬁ ve seconds, the display switches back to the

normal time display mode.

• Pressing and holding down the “Memory” button for

3 seconds allows you to delete the saved maximum

and minimum temperature and relative humidity.

Relative humidity trend display

After you insert the batteries, the weather station

measures the current relative humidity. The trend display

shows a neutral relative humidity course (horizontal

arrow).

The further course of the trend display is determined as

follows:

• If, after an hour, the relative humidity is more than

5% higher than the value measured ﬁ rst, then a

positive course is displayed (arrow pointing upwards).

• If, after an hour, the relative humidity is more than

5% lower than the value measured ﬁ rst, then a

negative course is displayed (arrow pointing

downwards).

If the relative humidity does not change within an hour,

then the upward or downward pointing arrow becomes a

horizontal arrow. The measured relative humidity is then

taken as the neutral value from which further prognoses

are made.

Air pressure display

The course of the air pressure within the last twelve

hours is displayed on the display in the form of a bar

chart. In addition, you have the option of displaying the

exact air pressure value, for example, 3 hours previously,

in the normal air pressure display. To do this, proceed as

follows:

Press the “History” button brieﬂy to display the air

pressure values of the last few hours. For example,

pressing the button seven times displays the air

pressure value seven hours ago.

You have the option of displaying the air pressure in

mb/hpa or inHg. To switch between these displays, brieﬂy

press the “/Hpa-inhg” button.

Weather forecast

The weather station uses the air pressure data of the last

six hours to create a weather forecast the next 12 to 24

hours. It must be taken into account that the data within

the ﬁ rst twelve hours after inserting the batteries will not

be correct, as the weather station has to get used to the

environmental circumstances after the restart.

The forecast can be given for a radius of up to 15-20km.

When forecasting the weather, the station uses ﬁ ve

different symbols: sunny, partly cloudy, cloudy, rainy and

stormy.

In addition, a snowﬂake is displayed when the outdoor

area temperature drops below minus four degrees.

Location / tides display /moon phase /sunrise and sunset

display

• Press and hold down the “Location” button for three

seconds until the city selection begins to ﬂ ash. Use the

arrow keys “+ & -/wave” to set your location. You can

see the list of all cities on the next page.

• Press “Location” to conﬁrm your setting.

The weather station now uses the saved data on the

selected city to determine the sunrise and sunset

times, the strength of the tides and the phases of the

sun and the moon.

Germany

City Abbreviations

Aachen AC

Berlin B

Düsseldorf D

Dresden DD

Erfurt EF

Frankfurt F

Flensburg FL

Freiburg FR

Hannover H

Bremen HB

Hamburg HH

Rostock HRO

Stralsund HST

Köln K

Kiel KI

Kassel KS

Leipzig L

München M

Magdeburg MD

Nürnberg N

Regensburg R

Stuttgart S

A B C D E F G H

Hama EWS1000 - 76044 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info