Bedienungsanleitung Hama EWS1100 - 87685 (Seite 4 von 15) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

607447

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Press Functions Hold 3 seconds

CLOCK Read time, calendar and day-of-week Set Clock & Calendar

ALARM Read alarm time; enable/disable alarm Alarm time setting

UP 1 step forward in setting Fast advance

Down 1 step backward in setting Fast backward

CHANNEL/ SEARCH Select indoor, Channel 1,2,3, auto scroll Search for remote sensor

MEMORY Read max/min temperatures & humidity Clear memory record

HEAT INDEX/ DEW POINT Read Heat Index & Dew Point

PRESSURE Toggle pressure unit hPa, inHg & mb Altitude setting

SNOOZE/LIGHT Trigger snooze alarm & extend backlight

ZONE Toggle RC time & Zone time Zone time setting

C/F Toggle degree C & F unit

Search for Radio-Controlled time

Thank you for purchasing the new generation color weather station. Designed and engineered with the state-of-art tech-

nology and components, this instrument will provide accurate and reliable measurement of barometric pressure, weather

forecast, in/ out humidity, temperature, heat index, dew point as well as moon phase and radio-controlled clock. Read this

manual carefully to fully explore the features and functions of the new product.

Name and Functions of Buttons

g Operating Instruction

Battery & adapter installation

Home Receiver Unit:

Main Power Source: Plug in the 4.5V adapter into the

adapter socket at the back for basic operation and

continuous backlight.

Backup Power: Lift off the battery cover, install 3 pieces of

AAA backup batteries according to the polarity indicated,

close the battery cover.

Remote Sensor:

Loosen the screws on the battery door with a small

screwdriver, insert 2 pieces of AAA batteries according to

the polarity indicated. Replace the cover and tighten the

screws.

Altitude setting

After battery installation, the main unit will enter altitude

setting mode directly. Press ” ” or ” ” to select the unit

in meter or feet. Press “PRESSURE” to conﬁrm. Then press

” ” or ” ” to enter your current altitude. Press “PRES-

SURE” to conﬁrm and exit the setting. This allows the unit to

provide a more accurate weather forecast

reading. (For more information, see “Weather forecast &

barometric pressure” section)

Setting up the wireless thermo-hygrometer

• For the ﬁ rst installation, always turn on the home unit

and then the remote sensor. Set Channel 1 for the ﬁ rst

remote sensor. Set channel 2 and channel 3 for the 2nd

and 3rd sensor.

• Press and hold CHANNEL/SEARCH button on main unit

until a beep is sound to search for remote sensor.

• Press the Tx button on the back of remote sensor to

transmit RF signal.

• When RF connection is established, the respective

temperature & humidity of the selected channel will

appear on the main unit.

Radio-controlled clock

The unit will start synchronizing the clock after battery/ad-

apter installation or reset. In normal mode, press in the

battery compartment to enforce searching of radio-

controlled clock signal.

The antenna icon will appear during synchronization, if the

icon disappear afterwards, radio time signal is not available

at the moment. Try other locations later. Place the unit

away from source of interference such as mobile phones,

appliances, TV etc.

Antenna icon with full signal strength will appear on

screen if the reception of radio-controlled time is

successful. The radio-controlled clock will have a daily

synchronization at 02:03 and 03:03 everyday. Each reception

cycle is minimum 2.5 minutes and maximum 10 minutes.

Weather forecast & barometric pressure

The unit predicts weather condition of the next 12 – 24

hours based on the change of atmospheric pressure. The

coverage area is around 30 – 50 km. The weather forecast

is based on atmospheric pressure change and is about

70-75% correct.

As weather conditions cannot be 100% correctly

forecasted, we cannot be responsible for any loss caused

by an incorrect forecast.

sunny partly cloudy cloudy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama EWS1100 - 87685 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info