723725
17
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
13
Open/unsecured network
Note
We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
If your desired network has no safeguards, it is
enough to select the network from the list and
conrm your selection. The soundbar then promptly
connects to the access point.
18. Activate pairing mode /connection to another
home network
Press and hold the [WIFI SETUP]button (network
pairing) (5) for about 5seconds. The network status LED
(5) pulsates.
The soundbar can now be connected to anew network
(as described in Section 6.2).
19. Connection between subwoofer and soundbar
(pairing)
Press and hold the [PAIRING]button on the subwoofer
until the LED light of the subwoofer begins to ash.
Then press the [PAIRING]button on the soundbar for
about 5seconds. The two devices then connect to one
another automatically.
20. Using your existing remote control
Note –Remote control
To enable programming, the remote control being
taught must have an infrared transmitter.
If the remote control has adifferent standard(for
example, Bluetooth), learning is not possible.
To check the standard: Point the remote control at
your smartphone’scamera. Check the remote control
for light pulses. If thereare light pulses on the remote
control, it is an IR remote control.
Button programming
The soundbar has alearning function. It allows you to
transfer up to three of your soundbar’sfunctions to any
remote control (for example, that of your TV set).
Press and hold both [VOLUME+/-] buttons (4) on the
soundbar at the same time. Keep them held for about 3
seconds to activate the learning mode. The LEDs on the
soundbar begin to ash quickly.
On the soundbar,press the button whose function you
want to transfer to abutton on the remote control.
On the remote control, press the button to be
programmed with the function.
The LEDs (7), (8) and (9) on the soundbar ash blue to
indicate successful learning. If learning has failed, these
LEDs will ash redthree times.
Note
The learning process is ended without saving, if no
button is pressed or no signal received for longer than
10 seconds.
Deleting programmed buttons
Press the [Action / Microphone mute](3), [VOLUME
+]and [VOLUME -](4) buttons at the same time to
delete all buttons with learnt functions.
21. Factory settings
To reset the soundbar to the factory default settings,
proceed as follows:
Press and hold the [MODE](2), [Action / Microphone
mute](3) and [VOLUME -](4) buttons for about 6
seconds to reset the soundbar to the factory settings.
The soundbar restarts after asuccessful reset.
Note
Resetting to the factory default settings can solve
some problems and malfunctions.
However,all settings made previously,such as custom
equaliser presets, favourites, and network proles, are
permanently deleted.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

hama-sirium4000abt---soundbar

Suche zurücksetzen

  • Warum blinkt das rote Licht an meinem HAMA Soundbar Eingereicht am 3-4-2022 12:42

    Antworten Frage melden
  • Warum leuchtet das rote Licht und wie bekomme ich das aus? Eingereicht am 29-3-2022 17:19

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hama SIRIUM4000ABT - Soundbar wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hama SIRIUM4000ABT - Soundbar

Hama SIRIUM4000ABT - Soundbar Bedienungsanleitung - Deutsch - 21 seiten

Hama SIRIUM4000ABT - Soundbar Bedienungsanleitung - Holländisch - 19 seiten

Hama SIRIUM4000ABT - Soundbar Bedienungsanleitung - Französisch - 19 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info