Bedienungsanleitung Hamilton KHAKI E.T.O. (Seite 3 von 53) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

563572

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

4 © 24.06.2013 – HAMILTON INSTRUCTION MANUAL 5

Calculation of time (E.T.O.)

Ex. Speed:  mph

Distance to cover:  miles

. Turn the exterior rotating bezel () so that the value

 (a tenth of  mph) is facing the red arrow.

. Read  on the same bezel ().

. Read the time value (E.T.O.) on the interior xed bezel

() = . minutes. For memorization, indicate the

E.T.O. value in the window () by using the crown (E).

Calculation of distance to cover

Ex. Speed :  mph

Time available:  minutes

. Turn the exterior rotating bezel () so that the value

 (a tenth of  mph) is facing the red arrow.

. Read  on the interior xed bezel ().

. Read the value of the distance to be covered on the

exterior rotating bezel () =  miles.

Calculation functions

The bezels of the E.T.O. allow you to calculate three values: time, distance and speed, for any units of measurement.

Split-seconds function

(intermediate times)

This function allows the display and reading of multiple

successive times measured from the same starting point.

The time taken to read the amounts can be caught up

on without disturbing the measurement of total elapsed

time.

. Press button (A): the chronograph starts.

. Press button (C) to read the rst intermediate time.

. Press button (C) again. The chronograph hands catch

up with the time elapsed since the beginning of the

measurement.

. Similarly, press button (C) again to read a further inter-

mediate time, and once again to cause the hands to

catch up.

. At the end of the whole measurement, press button

(A) to read the total time.

. Press button (B) to reset to zero.

NB: The maximum catch-up time is  minutes.

Memorization of the last

intermediate time

. Press button (A): the chronograph starts.

. Press button (C) to read the rst intermediate time.

. Press button (C) again. The chronograph hands catch

up with the time elapsed since the beginning of the

measurement.

. Press button (C) to read the second intermediate time.

. Press button (A) to read the nal total time.

. Press button (C) to read the memorized last interme-

diate time.

. Press button (C) to return to the nal time display.

. Press button (B) to reset to zero.

Flyback function

The yback function (also known as retour-en-vol or

instant restart) allows resetting of the counter hands to

zero by pressing button (B) without rst stopping the

timing. When the button is released, the large sweep sec-

onds-hand starts a new time measurement. This function

allows the user to gain some seconds in the manipulation

of the chronograph, which facilitates directional calcula-

tions for pilots, for instance.

. Press button (A): the chronograph starts.

. Press button (B): the chronograph returns to zero and

restarts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hamilton KHAKI E.T.O. Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info