495105
4
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Your new Leslie speaker system contains two rotors to produce the world-renowned “Sound-In-
Motion” effect. The upper frequencies are reproduced by the world-famous Ferro Fluid high-
compression driver and a custom-molded rotary horn. The lower frequencies radiate from the massive
15” woofer and the high-density custom-molded foam drum. The rotors can be operated in Fast
(Tremolo) or Slow (Chorale) modes. Our model 122XB Leslie also features an Off mode (rotors
stopped).
Product Overview
CAUTION
FOR CONTINUED
PROTECTION
AGAINST FIRE
HAZARD REPLACE
ONLY WITH SAME
TYPE 2A FUSE
The model 122A Leslie is specifically designed for older Hammond
organs such as Hammond organ models A, B, C, and RT, that require
a separate tone cabinet for sound reproduction. The Leslie 122A is
provided with a 6-pin Leslie connector to facilitate easy connection to
these Hammond organ products when used with the proper interface
kit (available at your local Leslie dealer). A Master Volume control,
which is located on the top of the power amplifier, is also provided.
The model 147A Leslie, which shares the same cabinet design as the
Leslie 122A, is recommended for single-channel organs with self-
contained speaker systems, such as Hammond organ model A-100 and
spinet models such as M, M-2, M-3, M-100 and L-100. In addition to
the 6-pin Leslie connector and Master Volume control, the 147A also
contains an Input Selector switch which is located to the left of the
Master Volume control on the top of the power amplifier. This switch
is used to electrically match the impedance of your organ speaker
system. We strongly recommend that a factory-trained technician set
the position of this switch.
The Leslie 122XB is electrically identical to the model 122A, except that it contains an 11-pin Leslie
connector, a ¼” Line Input jack, ¼” foot switch jack and an AC power switch. These features make the
122XB extremely easy to be connected to most keyboard products on the market today. The Leslie
122XB is also designed to interface with newer Hammond organs and keyboards like the New B-3,
Traditional and Pro XK Systems, and our XK-3 keyboard, that contain an 11-pin Leslie connector.
CAUTION
FOR CONTINUED
PROTECTION
AGAINST FIRE
HAZARD REPLACE
ONLY WITH SAME
TYPE 2A FUSE
Volume Control
6-pin Leslie Connector
Input Selector Switch
122A
147A
Volume Control
6-pin Leslie Connector
Diagram of Models 122A, 122XB, 147A
2-Speed Horn Rotor
Crossover
Network
15” Speaker
2-Speed
Foam Rotor
40W Amplifier
Signal Input
CAUTION
FOR CONTINUED
PROTECTION
AGAINST FIRE
HAZARD REPLACE
ONLY WITH SAME
TYPE 2A FUSE
ON
LINE IN
FOOT SW
AC Power Switch
Line Input Jack
Foot Switch Jack
11-pin Leslie Connector
Volume Control
122XB
OWNERS MANUAL Models 122A, 122XB, 147A
3
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hammond Leslie 147A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info