Bedienungsanleitung Hammond SK 2 (Seite 4 von 150) (Englisch)

495091

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

HA<O>

Sk1

Sk2

Owner’s Manual

IMPORTANT - PLEASE READ

uPower Supply

u Do not use this unit on the same power circuit with any

device that will generate line noise (such as an electric mo-

tor or variable lighting system).

u e AC adaptor will begin to generate heat after long hours

of consecutive use. is is normal, and is not a cause for

concern.

u Before connecting this unit to other devices, turn oﬀ the

power to all units. is will help prevent malfunctions and/

or damage to speakers or other devices.

uPlacement

u Using the unit near power ampliﬁers (or other equipment

containing large power transformers) may induce hum. To

alleviate the problem, change the orientation of this unit; or

move it farther away from the source of interference.

u is device may interfere with radio and television recep-

tion. Do not use this device in the vicinity of such receivers.

u Noise may be produced if wireless communications devices,

such as cell phones, are operated in the vicinity of this unit.

Such noise could occur when receiving or initiating a call,

or while conversing. Should you experience such problems,

you should relocate such wireless devices so they are at a

greater distance from this unit, or switch them oﬀ.

u Do not expose the unit to direct sunlight, place it near de-

vices that radiate heat, leave it inside an enclosed vehicle, or

otherwise subject it to temperature extremes. Also, do not

allow lighting devices that normally are used while their

light source is very close to the unit (such as a piano light),

or powerful spotlights to shine upon the same area of the

unit for extended periods of time. Excessive heat can de-

form or discolor the unit.

u When moved from one location to another where the tem-

perature and/or humidity is very diﬀerent, water droplets

(condensation) may form inside the unit. Damage or mal-

function may result if you attempt to use the unit in this

condition. erefore, before using the unit, you must al-

low it to stand for several hours, until the condensation has

completely evaporated.

u Do not allow rubber, vinyl, or similar materials to remain

on the unit for long periods of time. Such objects can dis-

color or otherwise harmfully aﬀect the ﬁnish.

u Do not paste stickers, decals, or the like to this instrument.

Peeling such matter oﬀ the instrument may damage the ex-

terior ﬁnish.

uMaintenance

u To clean the unit, use a dry, soft cloth; or one that is slightly

dampened.

u To remove stubborn dirt oﬀ plastic parts, use a cloth im-

pregnated with a mild, non-abrasive detergent. Afterwards,

be sure to wipe the unit thoroughly with a soft, dry cloth.

Try to wipe the entire surface using an equal amount of

strength, moving the cloth along with the grain of the

wood. Rubbing too hard in the same area can damage the

ﬁnish.

u Never use benzine, thinners, alcohol or solvents of any

kind, to avoid the possibility of discoloration and/or defor-

mation.

uAdditional Precautions

u Please be aware that the contents of memory can be irre-

trievably lost as a result of a malfunction, or the improper

operation of the unit. To protect yourself against the risk of

losing important data, we recommend that you periodically

save a backup copy of important data you have stored in the

unit’s memory in another MIDI device (e.g., a sequencer).

u Unfortunately, it may be impossible to restore the contents

of data that was stored in another MIDI device (e.g., a se-

quencer) once it has been lost. Hammond assumes no li-

ability concerning such loss of data.

u Use a reasonable amount of care when using the unit’s but-

tons, sliders, or other controls; and when using its jacks and

connectors. Rough handling can lead to malfunctions.

u When connecting / disconnecting all cables, grasp the

connector itself - never pull on the cable. is will avoid

causing short circuits, or damage to the cable’s internal ele-

ments.

u To avoid disturbing your neighbors, try to keep the unit's

volume at reasonable levels. You may prefer to use head-

phones, so you do not need to be concerned about those

around you (especially when it is late at night).

u When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise,

you will need to use equivalent packaging materials.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hammond SK 2 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info