Bedienungsanleitung Harman Kardon AVR40 (Seite 5 von 24) (Englisch)

502645

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Safety Information

Important Safety Information

Verify Line Voltage Before Use

Your AVR40 has been designed for use in

North America with 120 volt AC current.

Connection to a line voltage other than

that for which it is intended can create a

safety and fire hazard, and may damage

the amplifier.

If you have any questions about the volt-

age requirements for your specific model,

or about the line voltage in your area,

contact your dealer before plugging the

unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the

power cord supplied with your unit. If a

replacement cord is used, make certain

that it is of similar gauge. We do not rec-

ommend that extension cords be used

with this product. As with all electrical

devices, do not run power cords under

rugs or carpets or place heavy objects on

them. Damaged power cords should be

replaced immediately with cords meeting

factory specifications.

Handle The AC Power Cord Gently

When disconnecting the power cord from

an AC outlet, always pull the plug, never

pull the cord. If you do not intend to use

the amplifier for any considerable length

of time, disconnect the plug from the AC

outlet.

Do Not Open The Cabinet

There are no user serviceable compo-

nents inside this product. Opening the

cabinet may present a shock hazard, and

any modification to the product will void

your guarantee. If water or any metal

object such as a paper clip, wire or a

staple accidentally falls inside the unit,

disconnect it from the AC power source

immediately, and consult an authorized

service station.

CATV Or Antenna Grounding

If an outside antenna or cable system is

connected to this product, be certain that

it is grounded so as to provide some pro-

tection against voltage surges and static

charges. Section 810 of the National

Electrical Code, ANSI/NFPA No. 70-1984,

provides information with respect to

proper grounding of the mast and sup-

porting structure, grounding of the lead-

in wire to an antenna discharge unit,

size of grounding conductors, location of

antenna discharge unit, connection to

grounding electrodes and requirements

of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the

CATV (Cable TV) system installer’s atten-

tion to article 820-40 of the NEC that

provides guidelines for proper grounding

and, in particular, specifies that the cable

ground shall be connected to the ground-

ing system of the building, as close to the

point of cable entry as possible.

Installation Location

■ To assure proper operation, and to

avoid the potential for safety hazards,

place the unit on a firm and level

surface. When placing the unit on a

shelf, be certain that the shelf and

any mounting hardware can support

the weight of the product.

■ Make certain that proper space is pro-

vided both above and below the unit

for ventilation. If this product will be

installed in a cabinet or other enclosed

area, make certain that there is suffi-

cient air movement within the cabinet.

Under some circumstances a fan may

be required.

■ Do not place the unit directly on a

carpeted surface.

■ Avoid installation in extremely hot

or cold locations, or an area that is

exposed to direct sunlight or heating

equipment.

■ Avoid moist or humid locations.

■ Do not obstruct the ventilation slots on

the top of the unit, or place objects

directly over them.

AVR40 rev (j) 4/16/97

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA

LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE

LA PRISE ET POUSSER JUSQU'AU FOND.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

•AVR40 om (j).qx 9/15/98 3:47 PM Page 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR40 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info