502650
7
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
6 FRONT PANEL CONTROLS
Front Panel Controls
8 Video 3 Inputs: These audio/video inputs
may be used for temporary connection of video
games, camcorders, digital still cameras or
portable audio products. To select a source
connected to these jacks, press the Vid 3
Input Selector @.
9 Tape Selector: Press this button to select
the device connected to the Tape In jacks f
as the listening source.
) CD: Press this button to select the device
connected to the CD Input jacks as the
listening source.
! DVD Input Selector: Press this button to
select the device connected to the DVD Input
jacks as the listening and viewing source.
@ Video Input Selectors: Press one of
these buttons to select a source connected to
the rear panel Video inputs ¡a, or the front
panel Video 3 input 8.
# 6-Channel Direct Selector: Press this
button to select the output of an optional,
external 6-channel decoder connected to the
6-Ch Direct inputs § as the listening source.
$ AM/FM: Press this button to select the
tuner as the AVR 500’s input source.When it is
first pressed the last station tuned will be
heard. Press it again to change between AM
and FM bands.
% Tuning Button: Press the left side of the
button to tune lower frequency stations and the
right side of the button to tune higher frequency
stations. When a station with a strong signal is
reached, the TUNED indicator U will illumi-
nate in the Information Display
35
.
To tune manually, tap the button lightly and
note that the tuner will step up one frequency
per button press. When the button is held for a
few seconds you will note that the unit will
quickly search the frequency band. Release it
once the fast tuning starts and the tuner will
automatically scan for the next station with an
acceptable signal and then stop.
^ Preset Scan: Press this button to automat-
ically scan through the stations that have been
programmed in the AVR 500’s memory.The
tuner will play five seconds of each station
before moving to the next preset station. To
stop the scan when the desired station is heard,
press the button again. (See pages 24–25 for
more information on the tuner memory system.)
& Preset Stations Selector: Press this but-
ton to select stations that have been entered
into the preset memory. (See pages 24–25 for
more information on tuner programming.)
* Tuner Mode: Press this button to select
the stereo or mono mode for FM tuning. In the
STEREO mode a Stereo indicator T will illu-
minate in the information display, and stereo
reception will be provided when stations are
transmitting stereo signals. In the MONO mode
the left and right signals from stereo broadcasts
will be mixed together. Select MONO for better
reception of weak signals.
( Dolby Digital Selector: Press this button to
select the Dolby Digital surround mode when lis-
tening to a program that carries Dolby Digital
information. (See pages 21–24 for more informa-
tion on surround modes and digital audio.)
Ó Dolby Pro Logic Selector: Press this
button to select the Dolby Pro Logic surround
mode when listening to an analog program
that is encoded with surround-sound informa-
tion. (See page 21–23 for more information on
surround modes.)
Ô Dolby 3 Stereo Selector: Press this but-
ton to select the Dolby 3 Stereo listening mode.
This mode is used primarily when a center
channel speaker but no surround speakers, are
installed. (See pages 22 for more information
on surround modes.)
VMAx Mode Selector: Press this button
to activate the VMAx mode.When only front
left and right speakers are installed, VMAx
uses proprietary circuits to create a virtual
surround sound. (See pages 22 for more infor-
mation on VMAx.)
Ò Logic 7 Mode Selector: Press this button
to activate the Logic 7 modes. One press brings
up the Logic 7 Cinema mode, another press
activates the Logic 7 Music mode.When a
stereo source is in use, Logic 7 delivers sound
to all five speakers, creating a multichannel
sound field. (See page 22 for more information
on Logic 7.)
Ú Theater Mode Selector: Press this button
to activate the Theater mode as an alternate
surround mode when stereo sources are in use.
Û DTS Selector: Press this button to select
DTS decoding when listening to an audio or
video program that is encoded in the DTS for-
mat. (See pages 22–24 for more information on
surround modes and digital audio.)
Ù Surround Off: Press this button to turn off
all surround processing and to listen to a pro-
gram in traditional stereo from the left front
and right front speakers only.
ı
Mute: Press this button to momentarily
silence the speaker and headphone outputs of
the AVR 500.
ˆ Volume Control: Turn the knob clockwise
to increase volume, counterclockwise to
decrease the volume. If the AVR is muted,
adjusting volume control will automatically
release the unit from the silenced condition.
˜ Delay: Press this button to begin the
sequence of steps required to enter delay time
settings. (See pages 18–19 for more informa-
tion on delay times.)
¯ Digital Input Selector: When playing a
source that has a digital output, press this
button to select between the Optical d and
Coaxial e Digital inputs. (See pages 23–24
for more information on digital audio.)
˘ Set Button: When making choices during
the setup and configuration process, press this
button to enter the desired setting as shown
in the Information Display
35
,, into the
AVR 500’s memory.
¸ Multiroom Selector: Press this button
to activate the AVR 500’s Multiroom system.
(See page 26 for complete information on
Multiroom operation.)
33
Speaker Select Button: Press this button
to begin the process of selecting the speaker
positions that are used in your listening room.
(See page 16 for more information on setup
and configuration.)
34
Selector Buttons: When you are establish-
ing the AVR 500’s configuration settings, use
these buttons to select between the choices avail-
able, as shown in the Information Display
35
,.
35
Information Display: This display deliv-
ers messages and status indications to help you
operate the receiver. (See page 7 for a complete
explanation of the Information Display.)
36
Remote Sensor Window: The sensor
behind this window receives infrared signals
from the remote control. Aim the remote at this
area and do not block or cover it unless an
external remote sensor is installed.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info