Bedienungsanleitung Harman Kardon HKTS 210 SUB (Seite 5 von 6) (Englisch)

769907

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

HKTS 210 SUB/HKTS 200 SUB Connecting the Subwoofer, Operating

Your Subwoofer and Specifications

Connecting the Subwoofer to a Trigger Voltage Source

Trigger Cable

(supplied)

The subwoofer will automatically turn on if it receives a trigger voltage at its External

Trigger Input connector and will enter the Standby mode when the voltage ceases.

If your preamp/processor or another audio/video component has a trigger-voltage

connection that supplies between 3V and 30V (AC or DC), connect it to the subwoofer’s

External Trigger Input connector. If the component’s trigger-voltage connection has a

3.5mm mini jack, you can use the supplied combination LFE/trigger cable to make the

connection.

NOTE: Do not connect the subwoofer’s External Trigger input connector to a remote

control output (IR Out) of your home cinema system or surround receiver. Doing so could

lead to malfunction.

Operating Your Subwoofer

Turning the Subwoofer On and Off

Set the subwoofer’s Power switch to the “On” position.

If you set the Power On Mode switch to “Auto,” the subwoofer will automatically turn

itself on when it receives an audio signal, and it will go into the standby mode after it has

received no audio signal for 15 minutes. The subwoofer’s LED will glow white when the

subwoofer is on and will not be illuminated when the subwoofer is in the standby mode.

If you set the Power On Mode switch to “On,” the subwoofer will remain on at all times.

The subwoofer’s LED will glow white.

If you connect the subwoofer’s External Trigger Input connector to a trigger-voltage

source, the subwoofer will turn on whenever a trigger voltage is present and will enter

the standby mode after the trigger voltage ceases, regardless of the position of the

Power On Mode switch.

If you will be away from home for an extended period of time, or if you will not be using

the subwoofer for an extended period, switch the Power switch to the “Off” position.

Subwoofer Adjustments: Volume

Use the Subwoofer Level Control to set the subwoofer’s volume. Turn the knob clockwise

to increase the subwoofer’s volume; turn the knob counterclockwise to decrease the

subwoofer’s volume.

Notes on Setting Subwoofer Volume:

Sometimes the ideal subwoofer volume setting for music is too loud for ﬁlms, while the

ideal setting for ﬁlms is too quiet for music. When setting the subwoofer volume, listen

to both music and ﬁlms with strong bass content and ﬁnd a “middle ground” volume

level that works for both.

If your subwoofer always seems too loud or too quiet, you may want to place it in a

different location. See Placing the Subwoofer, on page 3, for more information.

Subwoofer Adjustments: Phase

The Phase switch determines whether the subwoofer’s piston-like action moves in and

out in phase with the satellite speakers. If the subwoofer were to play out of phase with

the satellite speakers, the sound waves from the satellites could cancel out sound waves

from the subwoofer, reducing bass performance and sonic impact. This phenomenon

depends in part on the placement of all the speakers in the room.

Although in most cases the Phase switch should be left in the “Normal” position, there

is no absolutely correct setting for the Phase switch. When the subwoofer is properly in

phase with the satellite speakers, the audio will be clearer, have maximum impact and

make percussive sounds like drums, piano and plucked strings sound more lifelike. The

best way to set the Phase switch is to listen to music that you know well and set the

switch in the position that gives drums and other percussive sounds maximum impact.

Subwoofer Adjustments: Bass Boost

When set to the “On” position, the Bass Boost switch enhances low-frequency

performance, resulting in bass with more impact, which you may prefer while watching

movies or listening to music. There is no harm in experimenting with this control. Setting

the switch to the “Off” position will return normal low-frequency performance to your

system.

Specifications

Low-frequency transducer: 8" (200mm) down-ﬁring cone

Ampliﬁer power: 200 watts

Frequency response: 45Hz – 200Hz (–6dB)

Controls: Volume, phase, bass boost

Connections: LFE (RCA-type); left and right line-level

(RCA-type)

Enclosure type: Sealed

External trigger input voltage: 3 – 30 volts, AC or DC

Power requirement: 120V, 60Hz (USA); 220V – 240V,

50/60Hz (EU)

Power consumption: <1W (standby); 200W (maximum)

Dimensions (H x W x D): 13-29/32" x 10-1/2" x 10-1/2"

(353mm x 267mm x 267mm)

Weight: 19.8 lb (9kg)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HKTS 210 SUB Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info