Bedienungsanleitung Harman Kardon HKTS 5 (Seite 7 von 10) (Englisch)

534545

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

HKTS 5

Speaker Connections and Operation

Operation

Turning the Subwoofer On and Off

Set the HKTS 160SUB’s Power switch to the "ON" position.

•

If the Power On Mode switch is set to "AUTO", the HKTS 160SUB will automatically

turn itself on when it receives an audio signal, and it will go into standby mode

when it has received no audio signal for 15 minutes. The subwoofer’s LED will

glow white when the subwoofer is on and will not be illuminated when the

subwoofer is in standby.

•

If the Power On Mode switch is set to "ON", the HKTS 160SUB will remain on at

all times. The HKTS 160SUB’s LED will glow white.

If you will be away from home for an extended period of time, or if you will not be using

the subwoofer for an extended period, switch the Power switch to the "OFF" Position.

Subwoofer Adjustments: Volume

Use the Subwoofer Level control to set the HKTS 160SUB’s volume. Turn the knob

clockwise to increase the subwoofer’s volume; turn the knob counterclockwise to

decrease the subwoofer’s volume.

Subwoofer Adjustments: Phase

The Phase switch determines whether the HKTS 160SUB’s piston-like action moves

in and out in phase with the satellite speakers. If the subwoofer were to play out of

phase with the satellite speakers, the sound waves produced by the subwoofer could be

canceled out, reducing bass performance and sonic impact. This phenomenon depends

in part on the relative placement of all the speakers in the room.

Although in most cases the Phase switch should be left in the "NORMAL" position,

there is no absolutely correct setting for the Phase switch. When the HKTS 160SUB

is properly in phase with the satellite speakers, the sound will be clearer and have

maximum impact, making percussive sounds like drums, piano and plucked strings

sound more lifelike. The best way to set the Phase switch is to listen to music that

you are familiar with and set the switch in the position that gives drums and other

percussive sounds maximum impact.

Subwoofer Adjustments: Crossover

The subwoofer’s Crossover control adjusts the subwoofer’s cutoff between 50Hz and

150Hz. The higher you set the Crossover control, the higher in frequency the subwoofer

will operate and the more its bass will “overlap” that of the system's other speakers.

This adjustment helps achieve a smooth transition of bass frequencies between the

subwoofer and the other speakers for a variety of different rooms and subwoofer

locations.

To set the Crossover control, listen for the smoothness of the bass. If the bass seems

too strong at certain frequencies, try a lower Crossover control setting. If the bass

seems too weak at certain frequencies, try a higher Crossover control setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HKTS 5 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon HKTS 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info