651769
5
Zoom out
Zoom in
Vorherige Seite
1/43
Nächste Seite
5
Safety notes
Safety precautions regarding high voltage/mains voltage
Very high tensions occur in electrical facilities. Due to voltage ash-over on damaged components (marten
damage etc.) or touching live components the risk of electric shock is likely.
Only user power supply lines with earthing contact.
Only use original cable sets.
Regularly check cables and power supply unit for damages.
Always connect the earth lead from device to vehicle rst.
Carry out installation work, as device connection or component replacement, always when ignition is
turned off.
Do not touch live components when ignition is turned on.
Safety precautions regarding the danger of suffocation
Carbon monoxide is arising with running engine. When breathed in, it will lead to a lack of oxygen in the blood
(danger to life).
Ensure the sufcient ventilation of the workplace.
Always turn on the extraction system and connect it to the vehicle's exhaust when engine is running.
Safety guidelines regarding danger of getting burned
If the engine is running, some components can become very hot (up to several 100°C).
Always use safety equipment (protective gloves etc.).
Do not run connection lines near hot components.
Safety guidelines regarding explosion hazard
Fuel vapours increase the risk of re and explosion when working on the fuel system.
No open re
D
o not smoke
Ventilate the room well
Safety precautions regarding the danger of injury
The running engine causes some parts to rotate (fan blades, belt drives etc.), which can lead to severe injuries.
If the vehicle is not protected against inadvertent rolling, you may be injured.
Do not reach into rotating components when engine is running.
Prevent inadvertent rolling of the vehicle (parking brake).
Additionally position gear selector of automatic gearboxes to P.
Do not run cables near rotating parts.
Safety precautions regarding noise
In order to prevent hearing defects, regard the following actions:
Protect workplaces near the test station against noise.
Use noise protection products.
Safety precautions regarding chemical burn
Escape of the liquid crystals due to a damaged TFT display can cause chemical burn. Immediately rinse
affected parts of the body or clothing with water (consult a doctor).
Immediately consult a doctor if the substance has been breathed or swallowed.
mega macs 42 Section A 3/4
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hella Gutmann mega macs 42 - HBMM42V3400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info