Bedienungsanleitung Hercules DJControl AIR (Seite 6 von 7) (Englisch)

624511

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

7 8

Loops Effects Sample

1 2

÷2

Loops Effects Sample

Min Max

USING THE PADS

USING THE AIR CONTROL PLACING A CUE POINT

CREATING A PLAYLIST

Eects, loops and samples are triggered

using the pads.

7.2

Press on a pad and, while maintaining pressure

on the pad, move your hand above the proximity

sensor to modulate the eect.

SENSOR + PAD

A Cue point is a marker that you can place in a music track. It lets you start

playback of the track from that point.

A playlist is a set of tracks that you choose to group together – as part of a

specic genre (electro, rock...) or theme (favorites, party, birthday, 80s...).

6.1 Applying an eect on a track that has been loaded and is being played

6.2 Playing a sample on a track that has been loaded and is being played

The new playlist appears in the Playlists folder.

9.3 Return to the folder containing your music,

using these buttons:

9.4 In DJUCED™, select one or more tracks using your mouse.

By holding down the SHIFT key on your computer's keyboard, you can select several consecutive les.

Drag and drop the selected les into the playlist you have created (here, “My Playlist”).

More information (forum, tutorials, videos...) available at www.HERCULESDJMIXROOM.com

Press the button.

6.3 Creating and playing a loop from a track that has been loaded and is

being played

Press the button.

Lightly tap on one or more of the

pads to trigger the eect(s).

Tap on one or more pads to trigger the

samples (a short snippet of music or

sound). The more pressure you apply on

the pad, the louder the volume of the

sample played will be. When a sample is

triggered on a pad, the pad stays lit up

the same amount of time as the sample

length: perhaps one second, for a short

sound like a drum hit; a few seconds, for

a sample of music (for example).

The corresponding eect is displayed

in DJUCED™, and is applied to the track

being played.

Click on the button (in the DJUCED™ software) to delete the Cue point.

8.1 Press the button to place a Cue point in the track loaded on deck A, for example.

8.2 Press the button again to start playback from the Cue point you have placed in the track.

Effects

Sample

When a track is being played, tap on pad 1 to create the start of the loop (or “Loop in” point), and then

tap on pad 2 at the moment where you want to mark the end of the loop (or “Loop out” point).

Use the vertical lines in DJUCED™ (1 line = 1 beat), as well as the music being played, to help you

determine the best place for the end of the loop.

DJUCED™ plays a part of the track as a loop. Tap on pad 2 to exit the loop and return to normal

playback.

Tap on pad 3 to divide the loop length in half, and tap on pad 4 to double the length of the loop.

Press the button.

Loops

7.1 Press the button.

Effects

GETTING STARTED WITH

DJ CONTROL AIR AND DJUCED™

9.2 Click the button to create a playlist.

Enter a name for the playlist, then click OK.

9.1

Highlight one of the tracks that you want to

add to the playlist, using these buttons:

The button appears on the left.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hercules DJControl AIR Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hercules DJControl AIR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info