Bedienungsanleitung Hisense 50K360G (Seite 4 von 24) (Englisch)

633791

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

III

Important Safety Instructions

Your TV also contains material that can be recycled and

reused. For disposal or recycling information, contact your

local authorities or the Electronic Industries Alliance at

www.eia.org to find a recycler in your area.

End of life directives

Power source

WARNING

Do not connect this unit to the power using any device

other than the supplied AC cord. This could cause fire,

electrical shock, or damage.

Do not use with a voltage other than the power voltage

specified. This could cause fire, electrical shock, or

damage.

TO USE AC POWER

1. The power cord is attached to the TV at the factory.

2. Connect the AC cord into an AC outlet.

CAUTION

When this unit is not used for a long time, (e.g., away on

a trip) in the interest of safety, be sure to unplug it from

the AC outlet.

Do not plug/unplug the AC cord when your hands are

wet. This may cause electrical shock.

The LCD panel contains almost 3 million thin film transistors,

which provide exceptionally sharp video quality. Occasionally,

a few non-active pixels may appear on the screen as a

fixed black (in the case of a dead pixel), blue, green, or red

point. These non-active pixels do not adversely affect the

performance of your TV, and are not considered defects.

Non-active pixels

22. When you connect the product to other equipment, turn

off the power and unplug all of the equipment from the

wall outlet. Failure to do so may cause an electric shock

and serious personal injury. Read the owner's manual of

the other equipment carefully and follow the instructions

when making any connections.

23. Sudden high volume sound may cause hearing or

speaker damage. When you use headphones, (if the unit

is equipped with a headphone jack) keep the volume at a

moderate level. If you use headphones continuously with

high volume sound, it may cause hearing damage.

CONDENSATION:

Moisture will form in the operating section of the unit if the

unit is brought from cool surroundings into a warm room or

if the temperature of the room rises suddenly. When this

happens, unit's performance will be impaired. To prevent

this, let the unit stand in its new surroundings for about an

hour before switching it on, or make sure that the room

temperature rises gradually.

Condensation may also form during the summer if the unit is

exposed to the breeze from an air conditioner. In such cases,

change the location of the unit.

HOW TO HANDLE THE LCD PANEL:

Do not press hard or jolt the LCD panel. It may cause the

LCD panel glass to break and injury may occur.

If the LCD panel is broken, make absolutely sure that you

do not touch the liquid in the panel. This may cause skin

inflammation.

If the liquid gets in your mouth, immediately gargle and

consult with your doctor. Also, if the liquid gets in your eyes

or touches your skin, consult with your doctor after rinsing

for at least 15 minutes or longer in clean water.

Possible Adverse Effects on LCD Panel:

If a fixed (non-moving) pattern remains on the LCD Panel

for long periods of time, the image can become permanently

engrained in the LCD Panel and cause subtle but permanent

ghost images. This type of damage is NOT COVERED BY

YOUR WARRANTY. Never leave your LCD Panel on for long

periods of time while it is displaying the following formats or

images:

Fixed Images, such as stock tickers, video game patterns,

TV station logos, and websites.

Special Formats that do not use the entire screen. For

example, viewing letterbox style (16:9) media on a normal

(4:3) display (black bars at top and bottom of screen); or

viewing normal style (4:3) media on a widescreen (16:9)

display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction

but technical limitation. Therefore we disclaim any

responsibility for these symptoms.

LCD Panels are manufactured using an extremely high

level of precision technology, however sometimes parts

of the screen may be missing picture elements or have

luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that

produces electromagnetic waves. Some equipment placed

too near this unit may cause interference.

Effect on infrared devices - There may be interference

while using infrared devices such as infrared cordless

headphones.

Declaration of Conformity

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and (2)

This device must accept any interference received, including

interference that may cause undesired operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hisense 50K360G Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info