Bedienungsanleitung Hitachi 43HGW69 (Seite 20 von 26) (Englisch)

646611

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English - 16 -

Using Audio Video Sharing Network Service

Audio Video Sharing feature uses a standard that eases

the viewing process of digital electronics and makes

them more convenient to use on a home network.

This standard allows you to view and play photos, music

and videos stored in the media server connected to your

home network.

1. Nero Media Home Installation

The Audio Video Sharing feature cannot be used if

the server programme is not installed onto your PC.

Please prepare your PC with the Nero Media Home

programme.

2. Connect to a Wired or Wireless Network

See the Wired/Wireless connection chapters for

detailed conguration information.

3. Play Shared Files via Media Browser

Select Media Browser by using the directional buttons

from the main menu and press OK. The media browser

will then be displayed.

Audio Video Sharing

Audio Video Sharing support is only available in the

Media Browser Folder mode. To enable folder mode,

go to the Settings tab in the main media browser screen

and press OK. Highlight View Style and set to Folder

using the Left or Right buttons. Select the desired media

type and press OK.

If sharing configurations are set properly, Device

Selection screen will be displayed after selecting the

desired media type. If available networks are found,

they will be listed on this screen. Select media server or

network that you want to connect to using the Up or Down

buttons and press OK. If you want to refresh the device

list, press the Green button. You can press Menu to exit.

If you select the media type as Videos and choose

a device from the selection menu. Then select the

folder with video les in it on the next screen and all

the available video les will be listed.

To play other media types from this screen, you must

go back to main Media Browser screen and select the

media type as desired and then perform the network

selection again. Refer to the Media Browser menu

section for further information on le playback.

Subtitle les do not work if you watch videos from

your network through Audio Video Sharing feature.

You can connect only one television to the same

network. If a problem occurs with the network, please

switch your television off at the wall socket and back

on again. Trick mode and jump are not supported with

the Audio Video Sharing feature.

Note: There may be some PC’s which may not be

able to utilize the Audio Video Sharing feature due to

administrator and security settings (such as business

PC’s).

For best home network streaming with this TV, the

Nero software should be installed.

Wireless Display (depending on the model)

Wireless Display is a standard for streaming video and

sound content by Wi-Fi Alliance. This feature provides

the ability to use your TV as wireless display device.

Using with mobile devices

There are different standards which enable sharing of

screens including graphical, video and audio content

between your mobile device and TV.

Plug the wireless USB dongle to TV rst, if the TV

doesn’t have internal WiFi feature.

Then press the Source button on the remote and

switch to Wireless Display source.

A screen appears stating that the TV is ready for

connection.

Open the sharing application on your mobile device.

These applications are named differently for each

brand, please refer to the instruction manual of your

mobile device for detailed information.

Scan for devices. After you select your TV and

connect, the screen of your device will be displayed

on your TV.

Note: This feature can be used only if the mobile

device supports this feature. Scanning and connecting

processes differ according to the programme you

use. Android based mobile devices should have the

software version V4.2.2 and above.

Connecting Other Wireless Devices (depending

on the model)

Your TV supports another short range wireless

connection technology too. A pairing is required before

using these kind of wireless devices with the TV set.

You should do the followings to pair your device with

the TV:

• Set the device to pairing mode

• Start device discovery on the TV

Note: Refer to the user manual of the wireless device

to learn how to set the device to pairing mode.

You can connect audio devices or remote controllers

wirelessly to your TV. Unplug or switch off any

other connected audio device in order for wireless

connection feature to work correctly. For audio

devices you should use the Audio Link option in the

Settings>Sound menu, for remote controllers the

Smart Remote option in the Settings>More menu.

Select the menu option and press the OK button to

open the related menu. Using this menu you can

discover and connect the devices that use the same

wireless technology and start to use them. Follow the

on-screen instructions. Start the device discovery. A

list of available wireless devices will be displayed.

Select the device you want to connect from the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi 43HGW69 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi 43HGW69

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info