Bedienungsanleitung Hitachi CL28W440AN (Seite 6 von 22) (Englisch)

54239

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

GB - 5 -

Via the SCART connector

Your TV set has two SCART connector sockets. This is

for the connection of equipment which is fitted with a

SCART socket e.g. video machine or satellite receiver.

AV-2 S Mode

If the equipment connected to your TV set supports S-

Video (Y/C) output from SCART, you can have a better

picture quality by selecting AV-2 S mode and connect-

ing your equipment to the EXT.2 terminal of TV. See your

equipment's booklet to check if your equipment has

such feature.

RGB mode

If an equipment can output the RGB signals, connect it

to the AV-1 (EXT.1) terminal.

• Select the RGB mode to watch images from that

equipment.

• When not in the RGB mode, turn the RGB signals

output equipment off.

Via Aerial Input

If the equipment you want to connect to your TV e.g.

video machine or satellite receiver does not have a

SCART socket, you should connect it to the aerial (ANT)

socket on your TV.

Decoder

Cable TV offers you a wide choice of programs. Most of

them are free, others are to be paid for by the viewer.

This means that you will need to subscribe to the broad-

casting organization whose programmes you wish to

receive. This organization will supply you with a corre-

sponding decoder unit to allow the programmes to be

unscrambled.

For further information ask your dealer. See also the

booklet supplied with your decoder.

Connecting a decoder with an aerial socket to

the TV

• Connect the aerial cable.

Connecting a decoder without an aerial socket

to the TV

• Connect the decoder to your TV with a SCART lead

to EXT.1 or EXT.2. When your decoder has a

SCART connector you can obtain better picture qual-

ity if you connect a SCART lead to EXTERNAL.

• Then select the appropriate AV mode by pressing the

“AV” button.

TV and Video Recorder

• If your video machine has a SCART socket please

connect it to the TV using a SCART lead. Your TV

should also be connected to your video machine us-

ing the aerial RF output socket.

Please note using a SCART lead will produce better

qualitiy pictures.

Playback of NTSC recordings

This TV can display video recordings played back in the

NTSC 3.58 / 4.43 mode.

Connect a VCR which is capable of playing a NTSC

recording to the SCART socket located on the back of

your TV or the phono or RCA sockets located on the

front of the TV.

Then press the “AV” button to select either AV1, AV2,

AV-2 S, AV3 or RGB.

Copy Facility

Source selection for VCR recording.

Select TV Setup Menu in the Install Menu.

• Select AV-2 OUTPUT source pressing “

“ or “ ”

button.

Search for and store the test signal of the

video recorder

• Unplug the aerial cable from the aerial socket “ANT”

of your video recorder.

• Switch on your TV and put the video recorder on the

test signal. (See the handbook for your video re-

corder.)

• Enter the Tuning menu via the Install menu.

• Search for the test signal of your video recorder in

the same way as you searched for and stored the TV

signals. See Tuning, Search and Store TV channels.

Store the test signal either under programme number

0 or between 55 and 99.

• Replace the aerial cable in the aerial socket “ANT” of

your video recorder once you have stored the test sig-

nal.

Camera and Camcorder

To connect to Front-AV input

Connect your camcorder to the front of your TV.

• Connect your equipment to the TV via VIDEO (yel-

low), AUDIO R (red) and AUDIO L (white) inputs .

You should connect the jacks to the input of the same

colour.

Connect the decoder to the video recorder

Some video recorders have a special SCART connec-

tor for decoder.

• Connect a SCART lead to the SCART connector of

your decoder and to the special SCART connector of

your video recorder. See also the handbook of your

video recorder.

• To connect your video recorder to the TV, see TV and

Video Recorder section.

If you want to connect more equipment to your TV, con-

sult your dealer.

Connecting Headphones

Use the stereo headphone socket (HP) to connect

headphones. This socket is located on the front / right

hand side of the television.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CL28W440AN Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info