54239
18
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
GB - 17 -
After APS is finalized, a rank list will appear on the
screen. In the rank list you will see the programme num-
bers and names, assigned to the programmes. First the
programme with programme number 1 will be displayed
and the programme number 1 will be flashing. Using
“ or or or key you can move the
flashing number and then display the programme cor-
responding to the flashing number pressing RED but-
ton.
If you do not accept the correspondence between pro-
gramme numbers and names and want to change them,
press
MENU” button and then BLUE button, so that
you enter the Install menu. In the Install menu select
TUNING menu and enter it. To use tuning menu, refer
to the Tuning submenu in the Install Menu section of this
manual.
TV Setup Menu
This menu is used to select the Menu Language, the
Country name and to select source of AV-2 Out
(Scart2).
Selecting Menu Language
To select menu language:
Press the "
MENU " button so that you enter the
main menu.
In the main menu select Install using the
“ or
buttons.
Open the install menu by pressing either of the
or “
” buttons.
(The Install menu can be entered directly by pressing
the blue button on the remote control handset.)
In the Install Menu select TV SETUP using the
or “
buttons.
Open the TV SETUP Menu using either of the
or “
buttons.
In the TV SETUP Menu select language and you can
change the language to the one you require, using ei-
ther of the
or buttons. As soon as you
change the language, the menu items will be dis-
played in the selected language.
Selecting the Country
Press the "
MENU " button so that you enter the
main menu.
In the main menu select Install using the
or
” buttons.
Open the Install menu by pressing either of the
“ or “ ” buttons.
(To open the Install Menu directly, do not enter the main
menu just press the BLUE button located on the remote
control handset.)
In the install menu select TV Setup using the
“ or
” buttons.
In the TV Setup menu select Country using the
or “
” buttons.
The country can be changed by pressing either of the
“ or “ ”' buttons.
Setting External Source Output
You can use this menu to select the internal or exter-
nal source that will be output at euroscart2.
To set AV-2 Output:
Press “
MENU button so that you enter the main
menu.
In the main menu select Install using
“ or
button.
Open the Install Menu pressing “ or ” but-
ton. (To open the Install Menu directly, do not enter
the main menu but only press the BLUE button).
In the Install Menu select TV Setup using
“ or
” button.
Open the TV Setup menu using “ or but-
ton.
In the TV Setup menu select AV-2 Output using
or
” button. Then select the source you want to
be output at scart2 pressing
or button
(one of the sources: TV, AV-1 (Scart1) or AV-3 (Front
AV).
Other Features
Sound Mute
To cut off the TV sound, press the " " button. This will
mute the sound.
To bring back the sound, press the "
" button or press
either of the
“ or ” buttons. The sound will return
to its previous level.
Blue Background During No-Signal
In case, no valid signal is detected (in TV or AV mode)
Blue Background is activated.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi CL28W440AN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info