Bedienungsanleitung Hitachi CR 13 VBY (Seite 5 von 60) (Englisch)

110241

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

Such preventive safety measures

reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool.

Power tools are dangerous in the

hands of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tools operation.

If damaged, have the power tool

repaired before use.

Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools

with sharp cutting edges are less

likely to bind and are easier to

control.

g) Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the

manner intended for the particular

type of power tool, taking into

account the working conditions and

the work to be performed.

Use of the power tool for operations

different from intended could result

in a hazardous situation.

5) Service

a) Have your power tool serviced by a

qualified repair person using only

identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

–WARNING–

To reduce the risk of injury, user must read

instruction manual.

c) Avoid accidental starting. Ensure the

switch is in the off position before

plugging in.

Carrying power tools with your

finger on the switch or plugging in

power tools that have the switch on

invites accidents.

d) Remove any adjusting key or

wrench before turning the power

tool on.

A wrench or a key left attached to a

rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away from

moving parts.

Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used.

Use of these devices can reduce

dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your

application.

The correct power tool will do the

job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be

controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power toll before making any

adjustments, changing accessories,

or storing power tools.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CR 13 VBY Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi CR 13 VBY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info