566984
5
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
English
5
DESCRIPTION OF FUNCTIONS OF KEY
COMPONENTS
Power switch Turns on or o the power supply
Pressure-reduction valve adjustment handle (H)
(RED cap)
Intended for exclusive use with the super nailer. It adjusts the
operating pressure of the Hitachi high pressure tool.
Pressure-reduction valve adjustment handle (L)
(GRAY cap)
Adjusts the pressure supplied to the general-purpose nailers
and pneumatic tools (operating air pressure 8 bar (116 psi)
maximum).
Pressure gauge in the tank Indicates pressure in the tank. The pressure increases up to
32.5 bar. (471.4 psi)
Pressure gauge for indicating the set reduction valve
pressure (2 gauges)
It indicates the set pressure on the pressure-reduction valves
(H) and (L).
(25 bar (362.6 psi) maximum on the H side and 8 bar (116 psi)
maximum on the L side.)
High pressure air socket (for Hitachi high pressure tools) It connects the Hitachi high pressure air hose for the Hitachi
high pressure tools.
Regular pressure air socket (for regular pressure tools) It connects the air hose for the regular-pressure nailers.
Drain lever It drains compressed air and water, Drain once when the work
is nished or more a day.
Power plug It is usable with a triode ground outlet.
SAFETY WARNINGS
WARNING
To avoid severe personal injury or property
damage.Before using the tool, read carefully
and understand the following "SAFETY
WARNINGS":
Failure to follow warnings could result in death
or serious injury.
PRECAUTIONS ON USING THE COMPRESSOR
Important information
Most accidents that result from compressor operation and
maintenance are caused by the failure to observe basic
safety rules or precautions. An accident can often be avoided
by recognizing a potentially hazardous situation before it
occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlines in the "SAFETY"
section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or
machine damage are identi ed by WARNINGS on the
compressor and in this Instruction Manual.
Never use this compressor in a manner that has not been
speci cally recommended by manufacturer, unless you rst
con rm that the planned use will be safe for you and others.
Death or serious bodily injury could result from improper or
unsafe use of compressor, to avoid these risks, follow these
basic safety instructions.
High pressure compressor provides both high pressure
and regular pressure air. For usage of high pressure air,
high pressure compressor is designed only for Hitachi high
pressure nailers and high pressure air hose. Unspeci ed
usage will cause serious accidents.
1. Never touch moving parts
Never place your hands, ngers or body parts near the
compressor's moving parts.
2. Never operate without all guards in place
Never operate the compressor without all guards or
safety features in place and in proper working order. If
maintenance or servicing requires the removal of a guard
or safety features, be sure to replace the guards or safety
feature before resuming operation of the compressor.
3. Always wear eye protection
Always wear safety goggles or equivalent eye
protection. Compressed air must never be
aimed at anyone or any part of the body. Be
sure to wear protective gear including the
sound-proo ng and protective garment, crash
cap and safety footwear suited for the given
working environment.
4. Protect yourself against electric shock
Prevent body contact with grounded surfaces such as
pipes, radiators, ranges and refrigeration enclosures.
Never operate the compressor in damp or wet locations.
5. Disconnect the compressor
Always disconnect the compressor from the power plug
and remove the compressed air from the air tank before
servicing, inspecting, maintaining, cleaning, replacing or
checking any parts.
6. Avoid unintentional starting
Do not carry the compressor while it is connected
to its power source or when the air tank is lled with
compressed air. Be sure the knob of the pressure switch
in the "OFF" position before connecting the compressor
to its power source.
7. Store compressor properly
When not in use, the compressor should be stored in dry
place. Keep out of reach of children. Lock-out the storage
area.
8. Keep work area clean
Cluttered areas invite injuries. Clear all work areas of
unnecessary tools, debris, furniture, etc.
9. Keep children away
Do not let visitors contact compressor extension cord. All
visitors should be kept safely away from work area. Keep
out of reach of children.
(Original instructions)
01Eng_EC1433H_WE.indd 501Eng_EC1433H_WE.indd 5 2010/09/01 14:25:352010/09/01 14:25:35
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi EC1433H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info