135080
7
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
Connecting with a scart cable and
'Easy Link'
Your video recorder can exchange information with your TV
set using 'Easy Link'. Furthermore, your TV channels can be
transferred in the same order from your TV set to your video
recorder using 'Easy Link'.
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), a
special scart cable (for Easylink) (3).
1 Switch off your TV set.
2 Remove the aerial cable plug from your TV set. Insert it
into the socket
2 at the back of the video recorder.
3 Insert one end of the supplied aerial cable into the socket
TV at the back of the video recorder and the other end
into the aerial input socket at the back of the TV set.
4 Plug in a special scart cable (for Easylink) into the scart
socket
EXT.1 AV. 1 at the back of the video recorder
and the scart socket on the TV set reserved for the video
recorder operation (see TV set operating instructions).
My TV set has several scart sockets. Which one should
I use?
Please see the operating instructions of your TV set to find
out which socket supports 'Easy Link'.
5 Switch on the TV set.
6 Insert one end of the supplied mains cable into the mains
socket
4 at the back of the video recorder and the
other end into the wall socket.
7 A message appears on the screen announcing that the
transfer has started.
The TV set transfers all saved TV channels, in the same
order, to the video recorder.
This may take several minutes.
When all the information has been transferred, the
following appears on the TV screen: 'YEAR', 'MONTH',
'DATE', 'TIME'.
CLOCK
YEAR è 2001 p
MONTH 01
DATE 01
TIME 20:00
SMART CLOCK ON
________________________________
EXITpMENU STOREpOK
8 Check the year in line 'YEAR'. If required, please change
the year with the number buttons
0-9 on the remote
control.
9 Select the next line using
;P+ or P- = .
0 Check 'MONTH', 'DATE', 'TIME' and if required modify in
the same way.
A When all information is correct, confirm with
OK .
The initial installation is now complete.
4
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

hitachi-vt-fx-140

Suche zurücksetzen

  • Das Video hat schlechte Bildqualität.wie kann man spuranlage einstellen

    Eingereicht am 5-10-2018 20:54

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi vt fx 140 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hitachi vt fx 140

Hitachi vt fx 140 Bedienungsanleitung - Deutsch - 37 seiten

Hitachi vt fx 140 Bedienungsanleitung - Holländisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info