Bedienungsanleitung Home Easy HE-401 (Seite 1 von 2) (Englisch)

558730

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Dimming Receiver Sockets HE220:

To dim a compatible receiver socket.

RE-INVENTING THE HOME

HOME

easy

1. Select the unit by

pressing the "unit"

button unitl the

correct number is

displayed on the

screen.

2. Press the "On"

button and then

press and hold and

hold the "On" button.

Never exceed 300W

maximum load .

3. The dimmer will start to dim the light unit till it reaches zero , then the

unit will start to increase the light upto the maximum level. To set the

desired level, press the "On" Button.

4. Press the "Off" button to switch the receiver unit off.

Rovemove the batter cover form the reverse of the remote control.

The HE-200 includes 2 batteries:

 LCD Display: 1 x Cr2032 -Byron SX100 (Included)

 RF Transmisson: 1 x 23A - Byron SD100 (Included)

remove the required batery and replace with new, making sure the

polarity matchs the internal markings.

V1.0

Product Specification:

Remote Control: HE-200

Battery: 3v Cr2032 & 12V 23A

Range: 30 Metres (Open Distance)

Frequency: 433.92MHz

Indoor Use Only

Warning: Never Exceed the Product Specification

Receiver Socket: HE-202

Input: 230V ~ 50Hz

Max Load: 300W (Incandescent)

Frequency: 433.92MHz

Indoor Use Only

Changing Batteries:

The HE-200 Remote Control Timer can be paired to 16

separate receiver units, select the unit code by pressing

the unit button.

Up to Six remote control units can be paired with each receiver socket or

module. To program a socket insert the unit into a plug socket and switch on

the power, now press and hold the "Learn" button for 3 seconds. The LED will

start to flash, now press the selected "ON" button on the remote control, the

LED will stop flashing. The units are now paired together, you can test this by

pressing the selected "ON/OFF" button

Always refer to the origional instruction when using with additonal products

Deleting Remote Control:

To delete a remote control that has been paired with a HE202 receiver socket,

simply press and hold the "Learn" for 3 seconds. The LED will start to blink;

press the off button on the remote control, the LED will blink twice to confirm

that the remote control has been removed from the receiver sockets memory.

Remote Socket reset:

To delete all the remote control units from the memory of the receiver socket,

hold the "Learn" button for more than 6 seconds, the LED will start to blink

continuously. Press the learn button again, the LED will blink twice to confirm

the deletion of all remote controls form the receiver memory.

Unit Setting:

The HE-200 comes with a preset to Group code A. When

using additonal remote control timers you will need to

select a new group code.

To select a new group code, remove the battery cover and

using a small screw driver, rotate the group dial to a new

setting e.g. Group B

The HE-401and HE-402 Remote Control

Outdoor wall switchs are expansion

units for the HomeEasy range of

products and designed to work with all

the HomeEasy receiver sockets and

modules.

Additional HomeEasy receiver products

are required for the HE-401/HE-402 to

work.

S1: On/Dim

S1: Off

2Gang:

HomeEasy Remote

Control Outdoor Wall Switch

S1: On/Dim

S1: Off

1Gang:

WARNING: attaching the outdoor switch to a metallic surface will reduce

the operating distance.

Remove the switch unit from the protective casing, attach

the casing to the wall using the screws and wall plugs

provided.

Reinsert the switch unit into the protective casing making

sure the unit is the correct way up.

Switch Installation:

Deleting Remote Control:

To delete a remote control that has been paired with a HomeEasy Receiver

socket or module, simply press the "Learn" button. The LED will start to blink;

press the "Off" button on the remote control, the LED will blink twice to

confirm that the remote control has been removed from the receiver sockets

memory.

Remote Socket reset:

To delete all the remote control units from the memory of the Receiver Socket

or module, hold the "Learn" button for more than 6 seconds, the LED will start

to blink continuously. Press the learn button again, the LED will blink twice to

confirm the deletion of all remote controls form the receiver memory.

Dimming: (Compatible Receivers Only)

To dim a compatible receiver socket or module, switch the receiver on using

"On" button and then press "On" again. The unit will now start to dim, to select

the required level press "On" again.

Product Operation:

Pairing/Deleting with Remote Control:

Up to Six remote controls can be paired with each Receiver Socket or

Module. To pair the switch and socket together, press the "Learn" button. The

LED will start to flash, now press the selected "On" button on the remote

control, the LED will stop flashing. The units are now paired together, you can

test this by pressing the selected "On/Off" button.

Always refer to the original instruction when using with additional products

On/Dim

Off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Home Easy HE-401 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info