Bedienungsanleitung Homedics MiBody 360 (Seite 3 von 5) (Englisch)

583616

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Select your measurement to target using drop down

Enter target level

Select target date

Click ‘next’ to continue

Changing your targets:

If you have achieved your target or wish to set new

targets, simply return to user set-up clicking on ‘user

setup’ on home page and follow the set up details as

before and chose a new or different target on the

‘personal target’ page.

To remove a user:

Enter ‘user setup’ from home page and click ‘remove

user’

A pop up box will then ask you if you are sure you

want to remove user.

To remove click ‘ok’

Important Note: if you are removing user all data for

this user will be deleted

Enter a password:

If you want to secure your user with password, enter

and confirm password

If you do not want a password then leave blank

Click ‘accept’to continue

This will bring you to the home page:

To change user select ‘switch user’

This will open the select user box – you can either

choose the correct user for you or set up a new user.

If setting up a new user repeat the original user set

up procedure.

Home page:

To add scales data:

1. Open MiBody360 software

2. Insert USB stick

3. Pop-up shows‘New weigh scales data has been

added’

4. Click‘ok’– it is now safe to remove USB stick.

Note: the scale device memory will be cleared at

this time

Weight page:

To view new data:

1. Click on ‘weigh scale’ image or title

2. This takes you directly to‘weight’ page – you

measurements are plotted as a line graph. Each

point representing a measurement – drag your

cursor over each point for the time and date of

actual measurement to be shown.

3. If you have set a target weight the orange section

of the graph will gradually track towards you

target so you can easily compare your progress

against your target weight.

4. To scroll along your results use the scroll bar

along the base of the graph

5. To zoom in or out of your results use the scroll

wheel on your mouse

6. To view the measurement data as a table select

‘table’ tab at top of graph

Body Fat page:

1. Your measurements are plotted as a line graph.

Each point representing a measurement – drag

your cursor over each point for the time and date

of actual measurement to be shown.

2. The graph is also split in to zones of ‘Low’ –

‘Optimal’–‘Moderate’ – ‘High’ to give an instant

indication of your health.

3. To view the measurement data as a table select

‘table’ tab at top of graph

4. ‘body fat’ definition is shown by dragging cursor

over the ‘body fat’tab

5. To view the measurement data as a table select

‘table’ tab at top of graph

7. To View other parameters select the suitable

‘tab’ on the lefthand side:

• ‘body fat’

• ‘body water’

• ‘muscle mass’

• ‘BMI’

• ‘BMR’

IMPORTANT NOTE:

IF YOU ARE CONCERNED ABOUT YOUR READINGS OR ANY ASPECT OF YOUR HEALTH, HoMEDICS

STRONGLY RECOMMENDS YOU REFER TO YOUR DOCTOR FOR FURTHER ADVISE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Homedics MiBody 360 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info