Bedienungsanleitung Homedics SS-4500-2 (Seite 5 von 35) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

518465

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Using the projection feature

1. To turn the projection feature on, slide the switch on the back of the unit (Fig 4) to the

ON position. The time is now projected on the ceiling.

Note: If the projection feature is off you may press the SNOOZE button (Fig 3) to

trigger 5 seconds of projection.

2. To turn the angle of the time that appears on the ceiling, rotate the TIME ROTATION

KNOB (Fig.1) until you have reached your desired result.

Note: The TIME ROTATION KNOB will rotate up to 350 degrees.

3. To focus the time on the ceiling, rotate the FOCUS KNOB (Fig 1.) until you have

reached your desired result.

4. The angle of the projector can be adjusted by angling forward or backward.

MAINTENANCE :

Storage

You may leave the unit on display, or you can store it in its box or a cool, dry place.

Cleaning

Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner to clean.

Note: Modifications not authorized by the manufacturer may void users authority

to operate this device.

Setting and using the alarm

1. Press the ALARM SET button (Fig 5). The time will flash.

2. While the time is flashing press the HOUR button (Fig 5) until you reach the correct

hour. Then press the MINUTE button (Fig 5) until you reach the desired minute.

3. After 5 seconds the alarm set time will stop flashing and it will be programmed, or

you may press the ALARM SET button.

Note: The PM indicator also applies to the alarm. You can review the alarm

setting any time by pressing the ALARM SET button.

4. To activate the alarm you may choose one of 3 wake options:

a. To wake to RADIO (Fig. 5) press the AL MODE button (Fig. 5) once. You may

leave it on the current station or adjust the TUNER.

b. To wake to a SOUND, press the AL MODE button a second time. It will set to the

last sound you listened to. If you wish to change it, press the sound you wish to

wake to and then press the POWER button (Fig 5).

c. To wake to BEEP, press the AL MODE button a third time.

Note: The ALARM MODE indicator (RADIO/SOUND/BEEP) will appear on the

right side of the clock face (Fig. 5), and will indicate that the alarm is set.

5. When the alarm sounds, the corresponding ALARM indicator (RADIO/SOUND/BEEP)

blinks. You may either:

a. SNOOZE: Press the SNOOZE button (Fig 3). Your sleep time will be extended by

9 minutes. You may use this feature until you turn the alarm off.

b. RESET: Turn the alarm off by pressing ANY button on the unit, except for the

SNOOZE button (Fig 1). The alarm clock will automatically reset for the next day

in its current mode. The corresponding ALARM indicator (RADIO/SOUND/BEEP)

will indicate this. If you wish to change the wake mode follow step 1 under Setting

and Using the Alarm.

c. OFF: To completely turn off the alarm so it is not set for the next day, continue to

press the AL MODE button until all the ALARM indicators (RADIO/SOUND/BEEP)

are all off.

Note: If the alarm sounds for 30 minutes continuously it will automatically

turn off and reset for the next day.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Homedics SS-4500-2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info