678138
49
Zoom out
Zoom in
Vorherige Seite
1/53
Nächste Seite
96 97
19.5 Minimum setpoint temperature
A minimum setpoint temperature of 4.5°C is set in the
factory settings. The minimum setpoint temperature (4.5
to 25.0°C) can be adjusted via the WebUI.
19.6 Valve error position
If an empty battery has not been recognized, the radia-
tor thermostat moves back into a „valve error position“.
This avoids, that the set temperature in the room incre-
ases due to a low battery. A valve error position of 15 %
is set in the factory settings. The value can individually
be adjusted (0 to 100 %) via the WebUI.
19.7 Valve offset
If several radiators in one room are operated with a
HomeMatic Radiator Thermostat some radiators may
heat more than others. In certain cases, some radiators
might be hot while others are still cold. To compensate
this, a valve offset can be set for the radiator thermostat
that is mounted on the cold radiator. A valve offset of
0% is set in the factory settings. The value can individu-
ally be adjusted (0 to 100 %) via the WebUI.
20 Troubleshooting and
maintenance
Error
code on
the dis-
play
Problem Solution
F1 Valve drive sluggish Check the installation;
check whether the pin on
the heating valve is stuck
F2 Actuating range too
wide
Check the fastening of the
actuator
F3 Actuating range too
narrow
Check the heating valve;
check whether the valve
pin is stuck
F4 Conictduringtea-
ching-in: CCU has al-
ready been taught-in
Delete radiator thermostat
from CCU; perform teach-
out function
F6 Conictduringtea-
ching-in: max. number
of 7 radiator thermo-
stats already taught-in
perform teach-out function
F7
Conictduringtea-
ching-in: max. number
of 8 window contacts
already taught-in
perform teach-out function
F8 Conictduringtea-
ching-in: no more de-
vices can be taught-in
perform teach-out function
Battery symbol battery voltage too
low
replace batteries of
radiator thermostat
Battery symbol
+ F9
battery voltage too
low, valve moved to
error position
replace batteries of
radiator thermostat
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HomeMatic HM-CC-RT-DN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info