Bedienungsanleitung Honda Honda Engines GSV190 (Seite 4 von 16) (Englisch)

13079

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Starting A Warm Engine

1. Move the flywheel brake lever to the RUN position.

2. Pull the starter grip lightly until resistance is felt, then pull briskly

(see page 3).

Stopping The Engine

1. Release the flywheel brake lever to stop the engine.

2. Turn the fuel valve to the OFF position (see page 2).

TYPE 4 (AUTOMATIC CHOKE RETURN/PRESET

THROTTLE)

Starting A Cold Engine

1. Turn the fuel valve to the ON

position (see page 2).

2. Move the choke lever to the

choke position ().

3. Move the flywheel brake

lever to the RUN position.

4. Pull the starter grip lightly

until resistance is felt, then

pull briskly (see page 3).

Begin pulling the recoil starter as soon as you move the flywheel

brake lever to the RUN position. The choke lever automatically

begins moving to the OFF position when the flywheel brake lever is

moved to the RUN position.

5. If the engine does not start within several consecutive pulls of the

recoil starter, release the flywheel brake lever and move the choke

lever to the ON position.

6. Move the flywheel brake lever to the RUN position and immediately

begin operating the recoil starter.

7. The throttle is preset on this type.

Starting A Warm Engine

1. Move the flywheel brake lever to the brake OFF position.

2. Pull the starter grip lightly until resistance is felt, then pull briskly

(see page 3).

Stopping The Engine

1. Release the flywheel brake lever to activate the flywheel brake and

stop the engine.

2. Turn the fuel valve to the OFF position (see page 2).

TYPE 5 (MANUAL CHOKE CONTROL/PRESET THROTTLE)

Starting A Cold Engine

1. Turn the fuel valve to the ON

position (see page 2).

2. Pull the choke rod to the ON

position.

3. Turn the engine stop switch to

the ON position.

4. Pull the starter grip lightly until

resistance is felt, then pull

briskly (see page 3).

5. If the choke was used to start the engine, move the choke rod to the

OFF position as soon as the engine warms up enough to run

smoothly without use of the choke.

6. The engine speed is preset on this type.

Starting A Warm Engine

1. Turn the engine stop switch to the ON position.

2. Pull the starter grip lightly until resistance is felt, then pull briskly

(see page 3).

Stopping The Engine

1. Move the engine switch to the OFF position.

2. Turn the fuel valve to the OFF position (see page 2).

TYPE 6 (REMOTE THROTTLE/BLADE BRAKE CLUTCH)

Starting A Cold Engine

1. Turn the fuel valve to the ON position (see page 2).

2. Move the choke/

throttle/stop lever to

the CHOKE position.

Make sure the blade

brake clutch control

lever is disengaged

(see equipment

manual).

3. Pull the starter grip

lightly until resistance

is felt, then pull briskly

(see page 3).

4. As soon as the

engine starts, slowly

move the choke/

throttle/stop lever to

the FAST position.

5. Allow the engine to warm to operating temperature, then engage

the blade brake clutch control lever (see equipment manual).

Starting A Warm Engine

1. Place the choke/throttle/stop lever in the FAST position.

Make sure the blade brake clutch control lever is disengaged (see

equipment manual).

2. Pull the starter grip lightly until resistance is felt, then pull briskly

(see page 3).

Throttle Setting

Position the choke/throttle/stop lever for the desired engine speed. For

best engine performance, it is recommended the engine be operated

with the choke/throttle/stop lever in the FAST (or high) position.

Stopping The Engine

1. Disengage the blade brake clutch control lever (see equipment

manual).

2. Move the choke/throttle/stop lever to the SLOW position and allow

the engine to idle for a few seconds.

3. Move the choke/throttle/stop lever to the STOP position.

4. Turn the fuel valve OFF (see page 2).

For best engine performance, it is recommended the engine be

operated with the throttle lever in the FAST (or high) position.

CHOKE

LEVER

OFF

RUN

FLYWHEEL

BRAKE LEVER

STOP

ENGINE STOP SWITCH

CHOKE

ROD

OFF

SLOW

CHOKE

CHOKE/

THROTTLE/

STOP

LEVER

FAST

STOP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda Honda Engines GSV190 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda Honda Engines GSV190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info