Bedienungsanleitung Honda Honda Engines GXH50 (Seite 3 von 48) (Englisch)

13141

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

BEFORE OPERATION CHECKS OPERATION

IS YOUR ENGINE READY TO GO? SAFE OPERATING PRECAUTIONS

STARTING THE ENGINE

Check the General Condition of the Engine

Check the Engine

FUEL VALVE LEVER

CCHHOOKKEE LLEEVVEERR

OONN

CCLLOOSSEEDD

OOPPEENN

CCLLOOSSEEDD

Review the instructions provided with the equipment powered by

this engine for any safety precautions that should be observed

with engine startup, shutdown or operation.

Move the fuel valve lever to the ON position.

To start a cold engine, move the choke lever to the CLOSED

position.

Carbon monoxide gas is toxic. Breathing it can cause

unconsciousness and even kill you.

Avoid any areas or actions that expose you to carbon

monoxide.

Improperly maintaining this engine, or failure to

correct a problem before operation, can cause a

malfunction in which you can be seriously hurt or

killed.

Always perform a preoperation inspection before

each operation, and correct any problem.

Before operating the engine for the first time, please review the

SAFETY INFORMATION

section on page and the

BEFORE

OPERATION CHECKS

Before beginning your preoperation checks, be sure the engine is

level and the engine switch is in the OFF position.

Always check the following items before you start the engine:

Look around and underneath the engine for signs of oil or

gasoline leaks.

Remove any excessive dirt or debris, especially around the

muffler and recoil starter.

Look for signs of damage.

Check that all shields and covers are in place, and all nuts, bolts,

and screws are tightened.

Check the fuel level (see page ). Starting with a full tank will

help to eliminate or reduce operating interruptions for refueling.

Check the engine oil level (see page ). Running the engine

with a low oil level can cause engine damage.

The Oil Alert

system (applicable types) will automatically stop

the engine before the oil level falls below safe limits. However,

to avoid the inconvenience of an unexpected shutdown, always

check the engine oil level before startup.

Check the air filter element (see page ). A dirty air filter

element will restrict air flow to the carburetor, reducing engine

performance.

Check the equipment powered by this engine.

Review the instructions provided with the equipment powered

by this engine for any precautions and procedures that should

be followed before engine startup.

For your safety, and to maximize the service life of your

equipment, it is very important to take a few moments before you

operate the engine to check its condition. Be sure to take care of

any problem you find, or have your servicing dealer correct it,

before you operate the engine.

To restart a warm engine, leave the choke lever in the OPEN

position.

05/04/22 18:53:05 32Z4C600_003

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda Honda Engines GXH50 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda Honda Engines GXH50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info