Hex Nut
Rubber
Washer
Finial Cap
Finial
14
LIGHT KIT INSTALLATION
23. To install the fan with the light kit:
Remove the three tter plate screws from tter
plate. Then connect the 9-pin connectors from the
motor assembly and the light kit. Ensure the plugs
are connected tightly (Fig. 23).
Fig. 23
Switch
Housing
9-pin
Connector
Fitter Plate
Fitter Plate
Screw
Fig. 24
Fitter Plate
Screw
24. Align holes in the switch housing with holes in the
tter plate. Re-insert the three previously removed
tter plate screws. Use a Phillips screwdriver to
secure all screws (Fig. 24).
Fitter Plate Screw
Fitter Plate Screw
Fig. 25
25. Remove the preassembled rubber washer, hex nut,
nial cap, and nial from the light kit (Fig. 25).
