6417
15
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
15
During warming up, the set temperature is too high and is shown blinking.
This is normal. While warming up, the thermostat shows the temperature setting of the
next period, usually blinking, when pressing the Information-button.
Changes in the temperature setting at the wrong time
- Check if the programmed time- and temperature-settings are correct, and if necessary
change them.
- Please take into account that heating up begins before the programmed time for this
same period is reached. This creates a nice, comfortable temperature at the start of this
period.
The heater does not start
- The fuse in the heater broke down, and needs to be replaced. If the heater still does not
work, call the company who installed or maintains your heater.
- If the display of the thermostat is empty or shows VERV BAT, change the batteries.
- If the set temperature is higher than the current temperature and the display shows the
flame-saymbol (meaning the heater should start), then call the company who installed or
maintains your heater.
The heater starts and stops too often
The response time of the heater does not match the properties of the thermostat. Possibly
you need to set the number of cycles per hour differently (if this is the case, please call
Honeywell Infolijn for instructions at 020 – 56 56 392).
The temperature in your home is too high or too low
- Press the INFORMATION button once to check the set temperature.
- In you wish, change the temperature temporarily using the WARMER or COLDER
button.
For all your questions about your thermostat please call:
e-mail: Infolijn@honeywell.com
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell chronotherm 4 T8602A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Honeywell chronotherm 4 T8602A

Honeywell chronotherm 4 T8602A Installationsanweisung - Englisch - 12 seiten

Honeywell chronotherm 4 T8602A Bedienungsanleitung - Holländisch - 57 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info