32387
7
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
STEP 4 Program The Thermostat
work or school. (This will be a higher tem-
perature during heating season, or a lower
temperature during cooling season.)
DAYTIME is the time period you can set for an
energy-saving temperature while you are
away at work or school. (This will be a lower
temperature during heating season, or a
higher temperature during cooling season.)
EVENING is the time period you want the
house at a comfortable temperature for
activities before bedtime. (Again, higher
heat or lower cool.)
NIGHT is the time period you can set for an
energy-saving temperature while you are
sleeping. (Again, lower heat or higher cool.
Although for more comfortable sleeping,
some people choose not to raise the cool
temperature during the night.)
10 69-0733—3
PROGRAMMING
After the batteries are installed, the thermostat
can be easily programmed in your hand before
it is installed on the wall.
If you would prefer to program the thermostat
after it is installed on the wall, skip to page 16,
and return later to this programming section.
The following personal programming chart
(pages 11 and 12) may be helpful when plan-
ning your program schedule of time and tem-
perature settings for various times of the day.
Four time periods are available—MORNING,
DAYTIME, EVENING and NIGHT. Each
period has its own setting key.
MORNING is the time period you want the
house at a comfortable temperature when
you get up and while you get ready for
9 69-0733—3
You will set one schedule for weekdays, one for
Saturday, and another for Sunday, because
your requirements will probably be different for
each.
Fill in the times and temperatures you desire for
weekdays, Saturday, Sunday. The factory-pre-
programmed time and temperature settings are
shown in parentheses. If you decide not to
program the thermostat, it automatically con-
trols to these settings. The thermostat requires a
time and temperature program for the MORN-
ING period. You can program DAYTIME and
EVENING, or leave them blank. You can also
change NIGHT or cancel it (see page 15), as you
please.
Before programming, remove the clear plastic
overlay covering the display.
When pressing the keys, use the ball of your
finger or a soft pencil eraser. Use of sharp finger-
nails or pencil points can damage the keypad.
If at any time during programming you make an
error, just press the RUN PROGRAM key, and
continue again at the step where you left off.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell CT3455 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info