Bedienungsanleitung Honeywell HCE643 series (Seite 2 von 16) (Englisch, Französisch, Spanisch)

724046

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ABOUT CERAMIC TECHNOLOGY

12. Warning – It is normal for the plug to feel warm

to the touch; however, a loose fit between the

AC outlet (receptacle) and plug may cause

overheating and distortion of the plug. Contact a

qualified electrician to replace loose or worn outlet.

13. Warning – To disconnect the heater, first turn off

the product, then grip the plug body and pull it

from the wall outlet. DO NOT pull by the cord.

14. Warning – DO NOT insert or allow foreign objects

to enter any ventilation or exhaust opening as

this may cause electric shock, fire, or damage

to the heater.

15. Warning – To prevent a possible fire, DO NOT

block air intakes or exhaust in any manner.

DO NOT use on soft surfaces, like a bed, or where

openings may become blocked.

16. Warning – A heater has hot and arcing or

sparking parts inside. DO NOT use it in areas

where gasoline, paint or flammable liquids are

used or stored.

17. Warning – Use this heater only as described in this

manual. Any other use not recommended by the

manufacturer may cause fire, electric shock, or

injury to persons.

18. Warning – ALWAYS plug heater directly into

a wall outlet/receptacle. DO NOT use with an

extension cord or relocatable power tap

(outlet/power strip).

19. Warning – NEVER tamper with this product

or attempt to fix it. Any tampering with, or

modification of this product can result in serious

injury, death, or fire. DO NOT open. Risk of electric

shock. There are no user serviceable parts inside.

20. Warning – DO NOT remove product labels

that contain warnings or safety instruction.

21. Caution – The output of this heater may vary

and its temperature may become intense enough

to burn exposed skin. Use of this heater is not

recommended for persons with reduced sensitivity

to heat or an inability to react to avoid burns.

22. Caution – Before cleaning, or storage, or when

not in use, turn the product’s controls to the OFF

position and unplug the heater from the electrical

outlet and allow to cool.

23. Caution – Place the heater on a firm, level, open

surface free from obstructions and at least 3 feet

(0.9 m) away from any combustible materials.

DO NOT use on an unstable surface such as

bedding or deep carpeting. Be sure the heater

is not in a position where it may be tripped over

by small children or pets.

24. Caution – If your home has aluminum wiring

have a licensed electrician check your receptacle’s

connections. When using a 1500 watt heater,

aluminum wire connections can cause a safety issue.

25.

SAVE THESE

INSTRUCTIONS

• Ceramic heaters generate heat by passing electricity through heating elements embedded in ceramic plates.

• In the Honeywell ComfortTemp™ 4 Ceramic Heater, air is drawn into the back of the heater by a fan, and then

pushed through the ceramic element and out the front of the heater to gently introduce warm air into the room.

• This type of heating technology provides consistent, even heating.

• For best heat output, place heater on the ﬂoor and allow it to run for 510 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HCE643 series Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info