Bedienungsanleitung Honeywell HFD360 Series - AIRGENIUS 6 (Seite 3 von 18) (Englisch, Französisch, Spanisch)

723813

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

4 5

CONTROLS THAT DO THE THINKING FOR YOU CONTROLS (CONTINUED)

Selecting Settings – Once you have tapped the POWER icon (

), tap the Cleaning Level icon (

) to select the

desired cleaning level. Your air cleaner will start on the General Cleaning setting each time you turn the air cleaner

on. Continue to tap the (

) icon to cycle through the cleaning levels to reach the desired setting. Here is a

handy reference to help get the most out of your air cleaner’s performance:

LEVEL 6 - MAX

Best for power cleaning when unpleasant odors are noticeable or you can sense that airborne particles are

present. This setting cleans the air the fastest of all the settings and circulates the air more frequently in the room.

LEVEL 5 - ALLERGEN

This setting makes the air cleaner perform at the proper level for reducing many types of airborne allergens.

It optimizes its performance for reducing allergens based on the particle size range of typical pollens. Best for

fighting airborne allergens during high allergen season, particularly in the spring and fall to help reduce airborne

pollen.

LEVEL 4 - PET

This setting optimizes performance to best capture pet hair and dander as well as reduce pet odors.

LEVEL 3 - GENERAL

Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those from

cooking or tobacco smoke.

LEVEL 2 - GERM

This setting slows down air movement so airborne microscopic germs are most effectively captured in the filter.

Germs, like certain bacteria and viruses, can be much smaller than other airborne particles or organisms. Giving the

germs more time to dwell in the filter increases the filtration efficiency. This setting can be used during cold and flu

season to help reduce certain germs from the air that passes through the filter.

LEVEL 1 - SLEEP

Best for ultra quiet operation, perfect for nighttime use when sleeping.

Auto-off Timer

Auto Timer Display

Germ Reduction Setting

General Cleaning Setting

Filter Check Reminder

Sleep/Quiet Setting

Cleaning Level

Oscillation

Bluetooth® Indicator

Dimmer

Oscillate – To turn Oscillation on, simply tap ( ) once. To turn Oscillation off, tap ( ) again.

Auto-off Timer – The Timer Option (

) allows you to select how long the air cleaner will run before it

automatically shuts off. The timer can be set in one hour intervals from one to eighteen hours. Do not use this

option if you want the unit to run continuously.

• To set the unit for Automatic Shut Off, TAP (

)

• TAP the up or down arrows ( ) to toggle through to the desired time setting

118 hours.

• The digital timer will indicate the selected run time (Fig. 3).

• The LED Display will automatically count down and display the number of hours left

on the timer.

• The unit will automatically shut off after the indicated run time.

Dimmer – The Dimmer Option (

) allows you to adjust the brightness of the LED lights on the control panel. You

may wish to adjust the brightness depending on the room where the unit is placed. The unit always turns on with

the brightness on HIGH.

To adjust brightness:

• TAP the (

) once to dim the lights to LOW.

• TAP the (

) twice and it will shut the lights OFF (the air purifier will not shut off).

• TAPPING the (

) a third time will return the brightness to HIGH.

NOTE: The Power (

) and the Bluetooth ( ) icon will always remain illuminated.

Using the VOC Function The AirGenius 6 has a built-in sensor that detects when Volatile Organic Compounds

(VOCs) are present in the room air. VOCs are gases that are emitted from certain household cleaning, home

improvement, and even common household décor products. These gases can be harmful or irritating if inhaled.

When the VOC auto sensing mode ( ) is selected, the AirGenius 6 will automatically operate at the appropriate

cleaning level to reduce these gases.

TAP the VOC Auto Sensing mode icon ( ) for automatic operation based on VOCs sensed in the room air.

When the VOC Auto Sensing mode is selected, the circular LED readout in the center of the control panel will

illuminate in green, amber or red to indicate the unit is running in automatic VOC

sensing mode. (Fig 4)

Green = Low level of VOCs detected, air cleaner will operate on lowest setting, Sleep.

Amber = Moderate level of VOCs detected, air cleaner will operate in the medium level

setting, General.

Red = High level of VOCs detected, air cleaner will operate in the Max setting.

The AirGenius 6 will continue to monitor the VOC levels in the room and adjust the

cleaning levels as necessary.

Electronic Filter Check Reminder The AirGenius 6 has an electronic CHECK FILTERS light to

remind you when it is time to wash the ifD

Particle Filter and replace the ODOR & VOC Reducing

Pre-filter. The

CHECK FILTERS light will illuminate after 2160 hours (3 months) of operation. It is recommended that you clean/

replace the filters every 3 months. The 3 month cleaning interval is intended as a guideline only. Performance of any

filter media is dependent upon the concentration of contaminants going through the system. High concentrations of

contaminants such as dust, pet dander, and smoke will reduce the useful performance life of the filters.

VOC sensor Auto mode

Fig. 3

Fig. 4

Allergen Reduction Setting

Pet Setting

Max Cleaning Setting

Power

Honeywell HFD360 Series - AIRGENIUS 6 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info