527105
2
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
Place the All Season Comfort
Fan & Heater on a firm, level, open surface free from obstructions and at
least 3 ft. (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small
children or pets.
With the product OFF (both the heater and fan on/off buttons will be elevated), plug into a polarized
120V wall outlet.
DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
Do not use with any converters or timers.
TO OPERATE THE HEATER MODE:
Press the red heater On/Off button ( ) on the
top, next to the thermostat control, to turn the
heater mode on.
The power light will illuminate on the front of
the product.
Turn the thermostat knob clockwise to turn
up the heat.
When the room reaches a comfortable temperature, slowly turn the thermostat control counter-
clockwise until the heater goes off. This is the point at which the thermostat setting equals the
room temperature. At this setting, the thermostat will automatically turn the heater on and off to
maintain this selected temperature.
Press the red On/Off heater button to turn off and unplug the heater
when you are finished using it.
NOTE: THIS PRODUCT IS EQUIPPED WITH A SAFEGUARD
ALERT HEAT
INDICATOR BADGE (FIG. 2). WHEN THE SAFEGUARD
ALERT BADGE
LOCATED ON THE GRILL CHANGES FROM BLACK TO RED THE GRILL IS
HOT TO THE TOUCH. DO NOT TOUCH THE GRILL UNTIL THE UNIT HAS
BEEN TURNED OFF AND THE SAFEGUARD
ALERT BADGE HAS TURNED
BACK TO BLACK.
USING THE OSCILLATION FEATURE:
Your HZ-0300 All Season Comfort
Fan & Heater is equipped with an
oscillation option. If you wish to use this feature, press the oscillation button
( ) and your unit will oscillate side to side. Push the oscillation button ( ) again to turn the oscillating
feature off.
SET-UP
OPERATING INSTRUCTIONS
Fig. 1
Fig. 2
Thermostat Control
Fan Control Knob
Oscillation
Button
Heater On/Off Button Fan On/Off Button
19. Do not operate the product with a damaged cord or plug or if the product malfunctions, is dropped or
damaged in any manner (see warranty).
20. Avoid contact with moving fan parts.
21. Place the product on a dry level surface.
22. Do not operate if the housing is removed or damaged.
23.
SAVE THESE INSTRUCTIONS
HZ-0300_OM.qxd 10/25/06 3:11 PM Page 2
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell HZ-0300 SERIES wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info