Bedienungsanleitung Honeywell TB6980 (Seite 3 von 6) (Englisch)

32697

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

TB6980/TB7980 62-0238 400-150-005-B 3/23/06 3/6

4. Configuration

4.1 Configuration Menus (See following pages for explanations)

TB7980A model

Application

(section 4.2)

Default mode &

Output 1 type

(section 4.3.1)

NSB value

(section 5.5)

Output 1

min. opening

(section 4.3.2)

Maximum

setpoint

(section 4.6)

Minimum

setpoint

(section 4.6)

Internal sensor

0 Cool / 0-10V 1 1°C (2°F) 0 0%

Can be set

between 35°C

(95°F) and

’’minimum

setpoint + 1’’

Default value

is 35°C (95°F)

Can be set

between 10°C

(50°F) and

’’maximum

setpoint - 1’’

Default value

is 10°C (50°F)

1 Room 1 Heat / 0-10 V 2 2°C (4°F) 1 10%

2 Return 2

Cool / 2-10 V 3 3°C (6°F) 2 20%

3 Supply 3 Heat / 2-10 V 4 4°C (8°F) 3 30%

4 Auto changeover 5 5°C (10°F) 4 40%

5 Limited cooling 6 6°C (12°F) 5 50%

7 7°C (14°F)

8 8°C (16°F)

9 9°C (18°F)

TB6980A model

Application

(section 4.2)

Default mode

(section 4.3.1)

NSB value

(section 5.5)

Output 1

min. opening

(section 4.3.2)

Output 1

opening time

(section 4.3.3)

Maximum

setpoint

(section 4.6)

Minimum

setpoint

(section 4.6)

Internal sensor

0 Cool 1 1°C (2°F) 0 0% 080

Can be set

between 35°C

(95°F) and

’’minimum

setpoint + 1’’

Default value

is 35°C (95°F)

Can be set

between 10°C

(50°F) and

’’maximum

setpoint - 1’’

Default value

is 10°C (50°F)

1 Room 1 Heat 2 2°C (4°F) 1 10% 1 90

2 Return 3

3°C (6°F) 2 20% 2 100

3 Supply 4 4°C (8°F) 3 30% 3 110

4 Auto changeover 5 5°C (10°F) 4 40% 4 120

5 Limited cooling 6 6°C (12°F) 5 50% 5 130

7 7°C (14°F) 6 140

8 8°C (16°F) 7 150

9 9°C (18°F) 8 160

TB7980B model

Application

(section 4.2)

Default mode &

Output 1 type

(section 4.3.1)

Output 2 type

(section 4.4)

Output 3 type

(section 4.5)

Output 3

activation

(section 4.5)

NSB value

(section 5.5)

Output 1

min. opening

(section 4.3.2)

Maximum

setpoint

(section 4.6)

Minimum

setpoint

(section 4.6)

Internal sensor

0 Cool / 0-10V 0 Not used 0 Not used 0 100% 11°C (2°F) 0 0%

Can be set

between 35°C

(95°F) and

’’minimum

setpoint + 1’’

Default value

is 35°C (95°F)

Can be set

between 10°C

(50°F) and

’’maximum

setpoint - 1’’

Default value

is 10°C (50°F)

1 Room 1 Heat / 0-10 V 1 SSR 24 VAC 1 SSR 24 VAC 1 10% 2 2°C (4°F) 1 10%

2 Return 2

Cool / 2-10 V 2 N.C. Valve 2 N.C. Valve 2 20% 3 3°C (6°F) 2 20%

3 Supply 3 Heat / 2-10 V 3 N.O. Valve 3 N.O. Valve 3 30% 4 4°C (8°F) 3 30%

4 Auto changeover 4 Mech. relay 4 Mech. relay 4 40% 5 5°C (10°F) 4 40%

5 Limited cooling 5 SSR 3-32 V 5 Contact 5 50% 6 6°C (12°F) 5 50%

6 SCR 0-10 V 6 60% 7 7°C (14°F)

7 Act. 0-10 V 7 70% 8 8°C (16°F)

8 Act. / 2-10 V 8 80% 9 9°C (18°F)

9 90%

a. If Output 2 type is set to 0-4, set the SW6 switch to Triac. If the output type is set to 5-8, set the switch to Analog (see section 4.7).

TB6980B model

Application

(section 4.2)

Default mode

(section 4.3.1)

Output 2 type

(section 4.4)

Output 3 type

(section 4.5)

Output 3

activation

(section 4.5)

NSB value

(section 5.5)

Output 1

min. opening

(section 4.3.2)

Output 1

opening time

(section 4.3.3)

Maximum

setpoint

(section 4.6)

Minimum

setpoint

(section 4.6)

Internal sensor

0 Cool 0 Not used 0 Not used 0 100% 11°C (2°F) 0 0% 080

Can be set

between

35°C (95°F)

and ’’min

setpoint + 1’’

Default

value is

35°C (95°F)

Can be set

between

10°C (50°F)

and ’’max

setpoint - 1’’

Default

value is

10°C (50°F)

1 Room 1 Heat 1 SSR 24 VAC 1 SSR 24 VAC 1 10% 2 2°C (4°F) 1 10% 1 90

2 Return 2 N.C. Valve 2 N.C. Valve 2 20% 3

3°C (6°F) 2 20% 2 100

3 Supply 3 N.O. Valve 3 N.O. Valve 3 30% 4 4°C (8°F) 3 30% 3 110

4 Auto changeover 4 Mech. relay 4 Mech. relay 4 40% 5 5°C (10°F) 4 40% 4 120

5 Limited cooling 5 SSR 3-32 V 5 Contact 5 50% 6 6°C (12°F) 5 50% 5 130

6 SCR 0-10 V 6 60% 7 7°C (14°F) 6 140

7 Act. 0-10 V 7 70% 8 8°C (16°F) 7 150

8 Act. / 2-10 V 8 80% 9 9°C (18°F) 8 160

9 90%

a. If Output 2 type is set to 0-4, set the SW6 switch to Triac. If the output type is set to 5-8, set the switch to Analog (see section 4.7).

n Remove the thermostat from its base and

set the SW2 switch to MENU.

o Reinstall the thermostat. The thermostat is

now in configuration mode. The first digit

flashes to indicate that the first item of the

menu can now be modified.

p To modify the setting, use the up/down

arrows. Refer to the adjacent tables.

q Press Override to save the new setting and

go to the next item.

r Repeat steps 3 and 4 for remaining items.

s When the configuration is done, set the

SW2 switch back to NORMAL.

NOTE: Factory settings are inside the shaded cells.

ABBREVIATIONS

NSB - Night setback (number of degrees

the thermostat will be set back upon

receiving a setback signal)

SSR - Solid state relay (used with fast

cycling electric heaters, SSR's are a quiet

alternative to electromechanical relays.

They're typically included with electric

duct reheat equipment)

SCR - Silicon controlled rectifier (similar

to an SSR, SCR's are also quiet and

capable of switching very high current. If

used, they're usually included with the

equipment)

N.C. - Normally closed

N.O. - Normally open

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell TB6980 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info