652395
16
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
16
With the Clock and Alarm icon flashing, press and hold SET button until the day of week language abbreviation “ENG”
will flash.
Press UP or DOWN arrow button to select the desired language for day of the week in English, German, French,
Italian, Spanish or Dutch
Press SET button to confirm selection.
Select the desired City Code flashing (LAX is Los Angeles for example) for your area by pressing UP or DOWN. This
will set the unit to the appropriate time zone for your location. Refer to table, back of this book, for a list of available
cities.
Press SET to confirm the city selection.
Press UP or DOWN to select the correct year.
Press SET to confirm year selection.
Press UP or DOWN to select the correct month.
Press SET to confirm selection.
Press UP or DOWN to select the correct date.
Press SET to confirm selection.
Press UP or DOWN to select the correct order of month & year. (M…D)
Press SET to confirm selection.
Press UP or DOWN to select either 12 hour(AM/PM) or 24 hour time (24:00) format
Press SET to confirm selection.
Press UP or DOWN to select the correct hour.
Press SET to confirm selection.
Press UP or DOWN to select the correct minute.
Press SET to confirm selection and to complete the initial programming for your weather station.
After programming is completed, the display will return to the default Clock and Alarm Window.
Note: If you do not complete this sequence your entries will be lost.
Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Window and all previous settings will
be cancelled.
Custom Weather Station Settings
The basic operation of your weather station has been designed to work right out of the box 10 minutes after power is provided
to the main unit. To use your station, you will have to complete the steps identified under INITIAL SETUP while this section of
the manual will provide you with additional operational details and suggestions for custom settings and alarms including:
The time alarms (Clock and Alarm Window)
The temperature alarms (Temperature and Humidity Window)
Daily rainfall alarm (Rain Window)
Wind alarms (Wind Window)
Downloaded from www.Manualslib.com manuals search engine
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell TE831W-2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info