652395
22
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
22
with icon (if disabled, displays OFF). You can program the same temperature alarm limits for all five temperature and
humidity channels
Programming Upper and Lower limits for Temperature Alarm
In the Temperature and Humidity Mode, press ALARM/CHART button once selecting the desired alarm limit – Upper
or Lower
Press and hold ALARM/CHART button until the remote temperature and
(Upper Alarm) or (Lower Alarm) icon
starts flashing.
Adjust the temperature digits for the corresponding Temperature Alarm limit using the UP Sor DOWN Tbuttons.
Press and hold either button for fast digits advance.
Press the ALARM/CHART button to confirm selection and return to the Temperature Alarm selection screen.
Disabling Temperature Alarm levels
With the Temperature & Humidity icon flashing, press the UP or DOWN arrow button to disable the alarm(s) – OFF will be
displayed if alarm is disabled
Note: The temperature alarms have a 0.5 ºC deviation to prevent false alarms due to small temperature fluctuations.
Temperature has to fall below (or above) the programmed level(s) to activate the alert.
Viewing the Max/Min Channel Temperature and Humidity
With the Temperature & Humidity icon flashing, press the MEMORY button to recall a current temperature and humidity,
minimum temperature and humidity or maximum temperature and humidity at the remote location. To clear the temperature
and humidity’s memories, press and hold the MEMORY button.
Rain Window
The main unit records the total amount of the rainfall for the last hour, 24 hours, past day, past week and the past month. The
rainfall can be displayed in mm or inches. There is a daily rainfall alert that can be programmed in the unit if the daily rainfall
exceeds a pre-programmed limit.
Selecting Rain Window
Press the UP or DOWN arrow buttons on the main unit until the RAIN icon on the display starts flashing.
Display:
Downloaded from www.Manualslib.com manuals search engine
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honeywell TE831W-2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info