Bedienungsanleitung HP OfficeConnect OC20 (Seite 1 von 4) (Englisch)

724186

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

OfficeConnect OC20

Access Point

Installation Guide

Rev 06 | March 2018 1

The OfficeConnect OC20 wireless access points (APs) support

IEEE802.11ac standards for high-performance WLAN, and are

equipped with two radios. Multiple-in, Multiple-output (MIMO)

technology allows these APs to deliver high-performance

802.11n 2.4 GHz and 802.11ac 5 GHz functionality, while also

supporting 802.11a/b/g wireless services.

The OC20 access points provide the following capabilities:

 Wireless transceiver

 IEEE 802.11a/b/g/n/ac operation as a wireless access point

or air monitor

 Compatibility with IEEE 802.3af PoE

 Centralized management configuration and upgrade

 Integrated Bluetooth Low Energy (BLE) Radio

Package Contents

 OC20 access point

 Ceiling Rail Adapter (spare: AP-220-MNT-C1)

 AP-220-MNT-W1W

 Quick Start Guide

This device must be professionally installed and serviced

by a trained ACMP or similar HPE-certified technician.

HPE access points are classified as radio transmission

devices, and are subject to government regulations of the

host country. The network administrator(s) is/are

responsible for ensuring that configuration and operation

of this equipment is in compliance with their country’s

regulations. For complete list of approved channels in

your country, refer to the refer to the ArubaOS

Downloadable Regulatory Table Release Notes at http://

h20565.www2.hpe.com/hpsc/doc/public/

display?docId=a00026718en_us.

Inform your supplier if there are any incorrect, missing, or

damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to

repack and return the unit to the supplier if needed.

Software

OC20 Hardware Overview

Figure 1 Front

LEDs

The OC20 access points have two LEDs that indicate the system

and radio status of the device. These two LEDs can be

configured into three separate modes:

 Normal mode (by default): See Table 1

 Both LEDs off

 Blink mode: Both LEDs blink green (synchronized)

Access points are radio transmission devices and are

subject to governmental regulation. Network

administrators responsible for the configuration and

operation of access points must comply with local

broadcast regulations. Specifically, access points must

use channel assignments appropriate to the location in

which the access point will be used.

Table 1 OC20 LEDs Status in Normal Mode

LED Color/State Meaning

System

Status

(Left)

Off Device powered off

Green-

Blinking

Device booting, not ready for use

Green- Solid Device ready for use, no restrictions

Green-

Flashing

Device ready for use, uplink negotiated in

sub optimal speed (<1Gbps)

Red- Solid System error condition

Radio

Status

(Right)

Off Device powered off, or both radios

disabled

Green- Solid Both radios enabled in access mode

Green-

Blinking

One radio enabled in access mode

Amber- Solid Both radios enabled in monitor mode

Amber-

Blinking

One radio enabled in monitor mode

Alternating

 Green: one radio in access mode

 Amber: one radio in monitor mode

System Status

Radio Status

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP OfficeConnect OC20 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info