Bedienungsanleitung HP Sprocket 2-in-1 (Seite 15 von 16) (Englisch)

682197

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

What if the device will not print?

• Turn on the printer. By default, the device is set to turn o after 5 minutes. To change when the device automatically turns

o, open the HP sprocket app on your mobile device. Tap

, tap sprocket, and then tap Auto O. Select your desired

timing.

• Charge the printer.

• Conrm Bluetooth is turned on and paired with your printer. If the printer is already paired to your mobile device, turning

Bluetooth o and then on might resolve the issue.

• Make sure the device has photo paper in the input tray. Load up to 10 sheets of HP Sprocket Photo Paper with the blue HP

ZINK™ Smartsheet.

• Move the printer and your mobile device closer together. Bluetooth signals can be weaker at greater distances.

• Update the printer rmware. Make sure your mobile device is connected to the Internet and then open the HP sprocket

app. If there is a rmware update available, a rmware update screen displays. Follow the on-screen prompts to complete

the update. Your printer must be charged to 50% or higher before a rmware update.

• Reset the printer. On the printer, locate the pin-hole under the Paper Cover, insert a straight pin into the hole to press the

reset button until the printer turns o. Restart the printer.

What can I do to improve print quality?

Use these recommendations and the sprocket app editing capabilities to improve print quality.

• Use genuine HP Sprocket Photo Paper. ZINK™ makes custom photo paper for a variety of printers, such as Polaroid, LG,

and HP. HP recommends using HP Sprocket Photo Paper for best results. To purchase genuine HP Sprocket Photo Paper, go

to hpsprocket.com/start. You can also purchase genuine HP Sprocket Photo Paper from other retailers.

• Always load the blue HP ZINK™ Smartsheet from the same pack of photo paper currently in the printer. Load the blue HP

ZINK™ Smartsheet into the paper tray with the barcode facing down and the photo paper with the HP logos facing down.

• Allow the printer a few minutes to cool down between print jobs.

• Store the photo paper in a cool, dry place and avoid contact with water. If water spills on a photo, wipe it away as soon as

possible to prevent damaging the photo.

• Update the printer rmware.

How do I clear a paper jam?

If the device stops feeding pages, it might be jammed. Clear paper jam and restart the device by sliding and holding the Power

Switch.

1. In the sprocket app, press OK to clear the error message.

2. Turn o the printer.

3. Remove the Paper Cover by sliding it away from the Output Slot. Remove any loose photo paper from the input tray.

4. Gently remove the jammed paper from the input tray.

5. Reload the remaining photo paper with the print side facing up.

6. Align the Paper Cover with the tracks on the outside of the printer, and then slide the Paper Cover toward the Output Slot

until it is rmly seated.

8. Turn on the printer.

See page 3 for paper loading illustrations.

Troubleshooting and FAQs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Sprocket 2-in-1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Sprocket 2-in-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info