Bedienungsanleitung Husqvarna BLi150 (Seite 3 von 64) (Alle Sprachen)

579190

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

BATTERY HANDLING

English

–

Key to symbols

Translation of the original Swedish operating instruction.

WARNING! Incorrect or careless use of

a battery can turn it into a dangerous

tool that can cause serious or even

fatal injury. It is extremely important

that you read and understand the

contents of the operator's manual.

Please read the operator’s manual

carefully and make sure you

understand the instructions before

using the machine.

This product is in accordance with

applicable EC directives.

Symbols on the product or its

packaging indicate that this product

cannot be handled as domestic

waste. This product must be

deposited at an appropriate

recycling facility.

Do not leave, store or use the

battery outdoors in the rain or in wet

conditions.

Battery safety

This section describes the battery and

battery charger safety for your battery product.

(1) to (8) refer to the ﬁgure on page 2.

Only use Husqvarna original batteries for Husqvarna

products and only charge them in an original battery

charger from Husqvarna. The batteries are software

encrypted.

Battery

The rechargeable Husqvarna batteries, BLi, are

exclusively used as a power supply for the relevant

Husqvarna cordless appliances. To avoid injury, the

battery must not be used as a power source for other

devices.

(1)

• Do not dismantle, open or shred batteries.

• Do not expose cells or batteries to heat or ﬁre. Avoid

storage in direct sunlight.

• Do not short-circuit a cell or battery. Do not store

batteries haphazardly in a box or drawer where they

may short-circuit each other or be short-circuited by

other metal objects.

• Do not remove a cell or battery from its original

packaging until required for use.

• Do not subject cells or batteries to mechanical shock.

• In the event of cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has

been made, wash the affected area with copious

amounts of water and seek medical advice.

• Do not use any charger other than that speciﬁcally

provided for use with the equipment.

• Observe the plus (+) and minus (-) marks on the cell,

battery and equipment and ensure correct use.

• Do not use any cell or battery which is not designed

for use with the equipment.

• Do not mix cells of different manufacture, capacity,

size or type within a device.

• Keep cells or batteries out of the reach of children.

• Always purchase the correct cell or battery for the

equipment.

• Keep cells or battery clean and dry.

• Wipe the cell or battery terminals with a clean dry

cloth if they become dirty.

• Secondary cells and batteries need to be charged

before use. Always use the correct charger and refer

to manufacturer’s instruction or equipment manual for

proper charging instructions.

• Do not leave a battery on prolonged charge when not

in use.

• After extended periods of storage, it may be

necessary to charge and discharge the cells or

batteries several times to obtain maximum

performance.

• Secondary cells or batteries give their best

performance when they are operated at normal room

temperature (20

C).

• Retain the original product literature for future

reference.

• Use only the cell or battery in the application for which

it was intended.

• When possible, remove the battery from the

equipment when not in use.

Operation

The display shows the battery capacity and if there are

any problems with the battery. The battery capacity is

displayed for 5 seconds after the machine is switched off

or the battery indicator button is pressed.

(8)

The warning

symbol on the battery is lit when an error has occurred.

See fault codes.

(6)

When all the LEDs are lit on the battery, it is fully charged.

(7)

Li-ion

LED lights Battery status

All LEDs are lit Fully charged (75-100%).

LED 1, LED 2, LED 3 are lit.

The battery is 50%-75%

charged.

LED 1, LED 2 are lit.

The battery is 25%-50%

charged.

LED 1 is lit.

The battery is 0%-25%

charged.

LED 1 ﬂashes

The battery is empty.

Charge the battery.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna BLi150 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info