517445
44
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
42
Troubleshooting
Reference
Page 14
Page 20
Page 10
Page 10
Page 21
Page 22
Page 13
Page 40
Change the bobbin.
Page 10
Page 10
Page 21
Page 10
Page 10
Page 14
Change the needle.
Page 20
Page 14
Make stitch shorter.
Page 40
Make stitch longer.
Page 8
Page 20
Page 5
Page 40
Page 12
Page 40
Page 40
Page 29
Use interfacing.
Page 8
Page 32
Page 32
Page 27
Page 27
Cause
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not placed under
the presser foot at start of sewing.
6. The threads were not drawn to the rear after sewing.
1. The bobbin thread is not threaded properly in the
bobbin case.
2. Lint has collected in the bobbin case.
3. The bobbin is damaged and does not turn smoothly.
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The threads were not drawn to the rear after sewing.
4. The needle is incorrectly inserted, bent or blunt.
5. The needle and/or threads are not suitable for the fabric being
sewn.
1. The needle thread is not threaded properly.
2. A poor quality needle is used.
3. The needle thread tension is too tight.
1. The needle thread is not threaded properly.
2. The stitch length is too long for the fabric.
1. The feed teeth are packed with lint.
2. The stitchlength is too short.
3. The feed teeth are not raised after ”drop feed” sewing.
1. The needle thread tension is too loose.
1. The machine is not plugged in.
2. Thread has been caught in the hook.
3. The bobbin winder spindle is still in the winding position.
1. Thread has been caught in the hook assembly area.
2. Lint has built up in the hook assembly area or bobbin case.
1. The stitch density is not suitable for the fabric being sewn.
2. Interfacing is not used when sewing on the stretch
fabrics.
1. Foot pressure is not adjusted properly.
1. Pull down buttonhole lever.
2. Be sure the buttonhole lever is in the back position.
1. Button must be tight in foot.
2. There is space in foot. Check gap.
Condition
The needle
thread breaks.
The bobbin
thread breaks.
The needle
breaks.
Skipped
stitches
Seam
puckering
The cloth is
not fed
smoothly.
Loops on the
seams
The machine
does not
work.
Noisy
operation
Buttonhole
is not sewn
neatly.
Layer slippage
Buttonhole
won't sew
Buttonhole
has gaps
44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna EMERALD 116 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna EMERALD 116

Husqvarna EMERALD 116 Bedienungsanleitung - Deutsch - 48 seiten

Husqvarna EMERALD 116 Bedienungsanleitung - Holländisch - 48 seiten

Husqvarna EMERALD 116 Bedienungsanleitung - Französisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info