610259
27
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
27
Turn the hand wheel to locate the needle at it’s Loosen Needle bar connecting screw A.
lowest position. Note: correct needle position is This will allow you to raise and lower
when you can see a small portion of the eye of needle bar for correct location. Note:
the needle. This picture shows correct location. Check all photos before making any adjustments
Hook Point
Adjusting rotating hook point timing with needle This picture shows needle bar and hook point at the
Turn the hand wheel counter clockwise to locate proper location. After needle bar rise.
needle to its lowest position. At lowest position Note if hook point is not in this location reference
turn hand wheel to raise needle 2.5 mm (1/8
) drawing 31 loosen screw D there are three screws.
Hook point should be just above eye of needle. At this point the rotating hook can be moved freely
On its shaft. To locate proper timing.
When adjusting the rotating hook point timing also note that clearance
between notch bottom of needle D and hook point C must be maintained.
Hook can not rub against needle. Also see drawing 31 for better view
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna MegaQuilter 18x8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info