675890
6
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
HYUNDAI
10 11
ENGLISH
- after touching a strange object. Immediately
check the appliance for damage and repair if
necessary;
- when the appliance starts to vibrate
abnormally (check immediately).
WARNING! This device produces an
electromagnetic field during operation.
This field may interfere in certain
circumstances with active or passive
medical implants. To reduce the risk of
serious or fatal injury, we recommend
that persons with medical implants
consult their physician and the medical
implant manufacturer before using this
device.
ELECTRICAL SAFETY
Always check that the power supply
corresponds to the voltage on the
rating plate.
For safe use, connect the appliance to an
earth leakage switch of max. 30 mA.
DESCRIPTION (FIG. A)
Your lawnmower has been designed for domestic
lawn mowing. Not suitable for professional use.
1. Grass bag
2. Motor housing
3. Upper handle bar
4. Lower handle bar
5. Switch lever
6. Safety button
7. Rear deflector
8. Cable holder
9. Rear wheel
10. Front wheel
11. Deck
12. Cable relief
13. Top carrying handle
14. Grass bag warning system
15. Switch box
16. Mower plug
17. Soft grip
18. Locking knob
19.
Package contents
The package contains the following parts:
Lawnmower
Grass bag
2 cable clips
4 knobs and screws
Hook
Manual
Safety warning
Guarantee and service
Mounting the handle bar (fig. B)
Fix the lower handle bars (4) into the unit body
with locking knobs (18).
Connect the upper handle (3) and the lower
handle with the locking knob (18).
Attach the cable holder (8) and then attach the
cable.
Fitting the grass bag
Raise the rear cover (7) and hitch the grass
bag (1) on rear of mower
Removing the grass bag
Grasp and lift the rear cover (7), remove grass
bag.
Setting the cutting heights (fig. C)
To obtain the desired cutting height, the front and
rear axles are repositioned on the underside of
the mower.
Warning! Disconnect the mower from
the power supply and ensure the blade
has stopped coasting before adjusting
the height.
To adjust the front wheel cutting height
position
Pull the wheel axle towards the front of the
mower.
Locate the wheel axle into the desired cutting
height.
To adjust the rear wheel cutting height
position
Pull the wheel axle towards the rear deflector.
Locate the wheel axle into the desired cutting
height.
Make sure that all wheels are located
in the same cutting height position.
INSTRUCTIONS FOR USE
Warning! Before connecting to the
mains supply, always check the switch
is in off position. Connect the plug into
the RCD protected power supply.
Connect the appliance to a suitable extension
cord.
Fit the extension cord (socket end of cord)
through the loop and secure over the hook
before connecting the plug.
Hold the appliance with both hands.
Keep the appliance away from hard objects
and plants.
When working long grass proceed layer for
layer. First set the appliance to the maximum
mowing height, then to a lower mowing height.
Only use the appliance for working dry grass.
Empty the grass bag after each use.
Switching on (fig. D)
Press the safety button (6) on the combined
switch firstly and keep it down and pull the
switch lever (5) at one time. The motor starts
and you can release the safety button.
Switching off
Release the switch lever (5).
Grass bag warning system
There is a warning system in the grass bag which
will indicate the grass volume.
If the flap is open it means that there is still
space for grass collection.
If the flap is closed it means that there is no
more space for grass.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
Regularly clean the ventilation slots.
Remove grass and dirt from the grass bag
after each use.
Before performing maintenance to the
appliance, always unplug the
appliance.
Cleaning the cutting mechanism
The cutting mechanism must be cleaned after
each use.
Remove large dirt particles using a soft brush.
Clean the cutting mechanism using a soft
cloth.
Apply a few drops of oil to the cutting
mechanism to avoid oxidation.
Replacing the blade (fig. E)
Wear working gloves.
Regularly check the condition of the blade and the
attachment. When the blade is worn, it must be
replaced.
When the lawnmower vibrates excessively, it
indicates an unbalanced blade or a knife that is
bent by impact force. In this case, repair or
replace the knife.
Unbalanced blades will cause the lawn
mower to vibrate violently-risk of
accident!
Use a 35 mm spanner to unscrew the plastic
nut in anticlockwise and remove the blade to
replace it by a new one.
Tighten the plastic nut in clockwise direction.
TECHNICAL DATA 57052
Mains voltage V 230-240
Mains frequency Hz 50
Power input W 1,200
No-load speed min
-1
3,500
Cable length cm 35
Cutting width cm 32
Cutting height cm 20-35-50
Diameter front wheel cm 12
Diameter rear wheel cm 14
Grass bag l 25
Weight kg 9.8
NOISE AND VIBRATION
Noise emission values measured according to
relevant standard. Typically the A-weighted sound
pressure level of the machine is 81 dB(A).
Uncertainty K = 3.0 dB(A).
The noise level when working can exceed 96 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) measured
according to relevant standard.
Vibration emission value a w = 2.5m/s
2
.
Uncertainty K = 1.5 m/s
2
.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hyundai 57052 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info