675848

Hyundai 57504 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
HYUNDAI
10 11
ENGLISH
HIGH-PRESSURE CLEANER
57504
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious
injury.Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the
enclosed safety warnings as well as the additional
safety warnings.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or
damage to the machine
The following pictograms are shown on the
machine:
Never point the water jet to yourself or
other persons. Never point the water
jet to the machine itself. Never point
the water jet to electrical wiring or
power outlets.
ADDITIONAL SAFETY WARNINGS FOR
HIGH-PRESSURE CLEANERS
Electrical safety
• Never point the water jet to electrical wiring or
power outlets because of risk of electric shock.
• If you use an extension cord, it must be of a
watertight construction.
• Always remove the plug from the socket
before carrying out any maintenance.
Using the wrong type of extension cord
can be dangerous!
Personal safety
• High-pressure cleaners must not be used by
children or untrained persons.
• Attention: when switching on the machine it
kicks back by the force of outgoing ater.
• Never use the machine near human beings,
unless they are wearing protective clothing.
• Never point the water jet to yourself or others
to clean clothing or footwear.
• Keep the high-pressure hose connected to the
machine as long as the system is under
pressure. Disconnecting the high-pressure
hose while the system is under pressure is
dangerous.
• Do not use acids or flammable liquids in the
machine. Only use detergents with ph-value of
6-8.
• Never use the machine if the connecting line,
safety provisions or other important parts have
been damaged.
• When not in use, the machine must be
switched off to avoid unintentional starting.
Power tool use and care
• Never point the water jet to the machine itself.
Service
• High-pressure hoses, couplings, etc. are
important for the safety of the machine. Only
use high-pressure hoses, couplings, etc. which
are recommended by the manufacturer.
• Only use spare parts from the manufacturer or
which have been approved by the
• manufacturer.
ELECTRICAL SAFETY
Always check that the power supply
corresponds to the voltage on the
rating plate.
• Preferably connect the machine to an electric
group which is protected with an earth leakage
switch of max. 30 mA.
DESCRIPTION (FIG. A)
Your high-pressure cleaner has been designed for
outdoor cleaning of stone, wood, metal and plastic
materials.
1. On/off switch
2. Connection for high-pressure hose
3. Connection for water supply
4. Handle
5. Pistol grip
6. Trigger
7. Safety catch
8. Lance
9. Nozzle
Mounting the lance (fig. B)
• Connect both parts of the lance (8) by fitting
the bayonet on the nozzle in the joint of the
pistol (5).
Before mounting or removing the
lance, always remove the plug from the
wall socket and make sure that the
pressure is off the system.
Mounting the soap holder (fig. C)
• Fasten the bayonet on the soap holder (10) in
the joint of the connecting piece of the lance
(8).
Connecting the high-pressure hose (fig. D)
• Screw the coupling nut (11) to the one end of
the high-pressure hose (12) onto the
• connection (13) on the pistol grip (5).
• Screw the coupling nut (14) to the other end of
the high-pressure hose onto the connection (2)
on the machine.
• Tighten the coupling nuts firmly.
Connecting to the water supply
• Remove the protective cap.
• Connect a garden hose which has been
connected to the water mains directly or via a
reducing nipple to the connection (3).
Adding a cleaning agent
• Loosen the cap and add a measured amount
of cleaning agent to the tank.
• Re-install the cap (8) and tighten it securely.
Only add a cleaning agent if the
machine is switched off and the tap of
the water mains has been closed.
Instructions for use
• Fully open the tap of the water mains before
switching on the machine.
• Hold the trigger of the pistol grip until all air is
released from the hose.
• As soon as water starts flowing out of the
nozzle, release the trigger and switch on the
machine.
• Take hold of the pistol grip and move the lance
evenly along the surface to be cleaned.
• Direct the nozzle as required in order to
achieve optimal cleaning results. Determining
the correct distance for the water jet is a
matter of experience.
• Close the tap of the water mains after having
switched off the machine.
• Hold the trigger of the pistol grip until the
pressure is off the system.
• Lock the trigger using the safety catch.
Never let the machine run idle for more
than 2 minutes. Within that period the
temperature of the water in the system
can become so high that the pump will
be damaged beyond repair.
• As soon as the pistol grip is released, the
machine automatically shuts off the water
supply.
Switching on and off (fig. A)
• To switch the machine on, set the on/off switch
(1) to ‘ON/I’.
• To switch the machine off, set the on/off switch
(1) to ‘OFF/0’.
The machine automatically switches off
in case of overheating. Wait 5 to 10
minutes before switching on the
machine again. Contact your supplier if
the machine stops again.
Soap supply
• Pull out the nozzle to put the soap supply into
operation.
• Press the nozzle to put the soap supply out of
operation.
Never put the soap supply into
operation while holding the trigger of
the pistol grip.
Adjusting the water jet (fig. E)
• Turn the nozzle (15) counterclockwise for a
pointed jet.
• Turn the nozzle clockwise for a flat jet.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
• Regularly clean the ventilation slots.
• If the machine is not used for a longer period
of time (3 months or more) or if it is stored in
an unheated area, then let the motor before
storage suck some anti-freeze to prevent the
risk of freezing and oxidation.
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hyundai 57504 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info