Bedienungsanleitung Icom HM-162B SW (Seite 4 von 8) (Englisch)

12204

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Set scan type (Priority or Normal scan) and scan resume timer

in advance, using Set mode.

q While pushing [H/L], push [CH/WX•DW ] several times

to select the desired channel group (USA, INT or CAN).

w Set TAG channels as described at previous item.

e Make sure the squelch is closed to start a scan.

r Push [SCAN•TAG] to start Pri-

ority or Normal scan.

•“

PPRRII--SSCCAANN 1166

”or “

NNOORRMMAALL

SSCCAANN

” appears during Priority

or Normal scan, respectively.

• When a signal is detected, scan

pauses until the signal disap-

pears or resumes after pausing

5 sec. according to the Set mode

setting (Channel 16 is still moni-

tored during Priority scan).

• Rotate [SELECTOR

] to check the scanning TAG channels,

to change the scanning direction or resume the scan manu-

ally.

•“

1166

” blinks at the channel comment indicator and a beep tone

sounds when a signal is received on Channel 16 during Prior-

ity scan.

t To stop the scan, repeat step r.

BUSYBUSY-25W25W------INTINT---CALL---CALL

LOCAL--DUPLOCAL--DUP

SCRAMSCRAM----TAGTAG

NORMALNORMAL-SCANSCAN

-34"34.206N34"34.206N

123"23.236W123"23.236W

----UTCUTC-10:10COMMERCIAL10:10COMMERCIAL

[CH[CH-]

During normal scan

Appears

U/I/C

, Call channel programming ⁄0 Dualwatch/Tri-watch operation

⁄1 Setting TAG channels

⁄2 Starting a scan

. Lock functions

q While pushing [H/L], push

[CH/WX•DW ] several times

to select the desired channel

group (USA, INT, CAN) to be pro-

grammed.

w Push [16•9] for 1 sec. to select call

channel of the selected channel

group.

•“

CCAALLLL

” and call channel number

appear.

e Push [16•9] again for 3 sec. (until

a long beep changes to 2 short

beeps) to enter the call channel

programming condition.

• The channel number to be pro-

grammed blinks.

r Rotate [SELECTOR

] to select

the desired channel.

t Push [16•9] to program the dis-

played channel as the call channel.

• The channel number stops blinking.

• Push [CH/WX] to cancel.

BUSY

-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

-34"34.206N

123"23.236W

--UTC-10:10- INTL

[CH-]

BUSY

-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

-34"34.206N

123"23.236W

--UTC-10:10- INTL

[CH-]

BUSY

-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

-34"34.206N

123"23.236W

--UTC-10:10-CALLING

[CH-]

BUSY

-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

-34"34.206N

123"23.236W

--UTC-10:10-CALLING

[CH-]

U/I/C

BUSY

-25W---INT---CALL

LOCAL--DUP

SCRAM--TAG

NORMAL-SCAN

-34"34.206N

123"23.236W

--UTC-10:10- VTS

[VOL]

The Lock function electronically locks keys and switches to

prevent accidental changes and function access from the mi-

crophone.

All keys, switches and controllers on the transceiver are

functional.

Activating the Lock function

➥ While pushing [H/L], push

[VOL/SQL•MONI ]

to turn the

Lock function ON or OFF.

•“ ” appears.

• Only [PWR] ([CLR]/[MENU]),

[DISTRESS], [PTT], [H/L],

[VOL/SQL•MONI ]

and [SE-

LECTOR] are functional.

Activating the All Key Lock function

➥ While pushing [H/L], turn the

power ON by pushing [PWR] to

turn the All Key Lock function ON

or OFF.

•“ ” blinks.

• Only [PWR] ([CLR]/[MENU]),

[DISTRESS] and [PTT] are func-

tional.

BUSY-25W25W------INTINT------CALLCALL

LOCAL--LOCAL--DUPDUP

SCRAMSCRAM--TAG--TAG

NORMAL-SCANNORMAL-SCAN

-34"34.206N34"34.206N

123"23.236W123"23.236W

----UTCUTC-10:1010:10- - INTLINTL

[CH-][CH-]

Blinks

BUSY-25W25W------INTINT---CALL---CALL

LOCAL--LOCAL--DUPDUP

SCRAMSCRAM--TAG--TAG

NORMAL-SCANNORMAL-SCAN

-34"34.206N34"34.206N

123"23.236W123"23.236W

----UTCUTC-10:1010:10- - INTLINTL

[CH-][CH-]

Appears

q Select Dualwatch or Tri-watch in

Set mode.

w Rotate [SELECTOR

] after

pushing [CH/WX•DW ] to

select the desired channel.

• While pushing [H/L], push

[CH/WX•DW ] several times

to select the channel group

(USA, INT, CAN), if desired.

e Push [CH/WX•DW ] for 1 sec. to start Dualwatch or Tri-

watch.

•“

DDUUAALL 1166

” appears during Dualwatch; “

TTRRII 1166

” appears

during Tri-watch.

•Abeep tone sounds when a signal is received on Channel 16.

•Tri-watch becomes Dualwatch when receiving a signal on the

call channel.

r To cancel Dualwatch or Tri-watch, push [CH/WX•DW ]

again.

U/I/C

BUSYBUSY-25W25W------INTINT---CALL---CALL

LOCAL--DUPLOCAL--DUP

SCRAMSCRAM--TAG--TAG

--------DUALDUAL-1616

-34"34.206N34"34.206N

123"23.236W123"23.236W

----UTCUTC-10:10COMMERCIAL10:10COMMERCIAL

[VOL][VOL]

Appears

q While pushing [H/L], push [CH/WX•DW ] several times

to select the desired channel group (USA, INT or CAN).

w Push [CH/WX•DW ] then rotate [SELECTOR

] to se-

lect the desired channel to be set as a TAG channel.

e Push [SCAN•TAG] for 1 sec. to set the displayed channel

as a TAG channel.

•“

TTAAGG

” appears in the display.

r To cancel the TAG channel setting, repeat step e.

•“

TTAAGG

” disappears.

✔ Clearing (or setting) all tagged channels

While pushing [H/L], push [SCAN•TAG] for 3 sec. (until a long

beep changes to 2 short beeps) to clear all TAG channels in

the channel group.

• Repeat above procedure to set all TAG channels.

U/I/C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom HM-162B SW Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info