Bedienungsanleitung Icom IC-706MKIIG (Seite 2 von 75) (Englisch)

12316

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

EXPLICIT DEFINITIONS

PRECAUTIONS

IMPORTANT

RReeaadd tthhiiss iinnssttrruuccttiioonn mmaannuuaall ccaarreeffuullllyy

before attempting to operate the transceiver.

SSaavvee tthhiiss iinnssttrruuccttiioonn mmaannuuaall..

This instruction

manual contains important safety and operating

instructions for the IC-706MKIIG.

WWAARRNNIINNGG HHIIGGHH VVOOLLTTAAGGEE!! NNEEVVEERR

attach an antenna or internal antenna connector dur-

ing transmission. This may result in an electrical shock

or burn.

NNEEVVEERR

apply AC to the [DC13.8V] socket on the

transceiver rear panel. This could cause a ﬁre or ruin

the transceiver.

NNEEVVEERR

apply more than 16 V DC, such as a 24 V

battery, to the [DC13.8V] socket on the transceiver

rear panel. This could cause a ﬁre or ruin the transceiv-

er.

NNEEVVEERR

let metal, wire or other objects touch any

internal part or connectors on the rear panel of the

transceiver. This will cause electric shock.

NNEEVVEERR

expose the transceiver to rain, snow or

any liquids.

NNEEVVEERR

allow children to play with the transceiver.

AAVVOOIIDD

using or placing the transceiver in areas with

temperatures below –10°C (+14°F) or above +60°C

(+140°F). Be aware that temperatures on a vehicle’s

dashboard can exceed 80°C, resulting in permanent

damage to the transceiver’s front panel if left there for

extended periods.

AAVVOOIIDD

placing the transceiver in excessively dusty

environments or in direct sunlight.

AAVVOOIIDD

placing the transceiver against walls or putting

anything on top of the transceiver. This will obstruct

heat dissipation.

During mobile operation,

DDOO NNOOTT

operate the trans-

ceiver without running the vehicle’s engine. When

transceiver power is ON and your vehicle’s engine is

OFF, the vehicle’s battery will soon become exhausted.

Make sure the transceiver power is OFF before start-

ing the vehicle. This will avoid possible damage to the

transceiver by ignition voltage spikes.

During maritime mobile operation, keep the transceiv-

er and microphone as far away as possible from the

magnetic navigation compass to prevent erroneous

indications.

BBEE CCAARREEFFUULL!!

The heatsink will become hot when

operating the transceiver continuously for long peri-

ods.

BBEE CCAARREEFFUULL!!

If a linear ampliﬁer is connected, set

the transceiver’s RF output power to less than the lin-

ear ampliﬁer’s maximum input level, otherwise, the lin-

ear ampliﬁer will be damaged.

Use Icom microphones only (supplied or optional).

Other manufacturer’s microphones have different pin

assignments and connection to the IC-706MKIIG may

damage the transceiver.

Beat signals may be heard on some frequencies.

These will occur as a result of circuit construction.

For U.S.A. only

CCaauuttiioonn::

Changes or modiﬁcations to this transceiver, not

expressly approved by Icom Inc., could void your authority

to operate this transceiver under FCC regulations.

The explicit deﬁnitions described below apply to this

instruction manual.

WWOORRDD DDEEFFIINNIITTIIOONN

WWAARRNNIINNGG

Personal injury, fire hazard or electric

shock may occur.

CCAAUUTTIIOONN

Equipment damage may occur.

NNOOTTEE

If disregarded, inconvenience only. No risk

of personal injury, ﬁre or electric shock.

IC-706MKIIG.qxd 02.3.27 13:53 Page i

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-706MKIIG Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info