12362
4
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
Front panel
q POWER SWITCH [POWER/TIMER]
Push momentarily to turn power ON.
Turn the optional DC power supply ON in advance.
A/D converter calibration of the DSP unit starts and it
takes approx. 10 sec.
Push momentarily to toggle the timer function ON
and OFF. (p. 63)
The power switch lights while the timer function is ON.
Push for 1 sec. to turn power OFF.
w TRANSMIT SWITCH [TRANSMIT]
Selects transmitting or receiving.
The [TX] indicator lights red while transmitting and the
[RX] indicator lights green when the squelch is open.
e HEADPHONE JACK [PHONES]
Accepts headphones.
Output power: 5 mW with an 8 load.
When headphones are connected, the internal speaker
or connected external speaker does not function.
r ELECTRONIC KEYER JACK [ELEC-KEY] (p. 43)
Accepts a paddle to activate the internal electronic
keyer for CW operation.
Selection between the internal electronic keyer, bug-key
and straight key operation can be made in keyer set
mode. (p. 43)
A straight key jack is separately available on the rear
panel. See [KEY] on p. 12.
Keyer polarity (dot and dash) can be reversed in keyer
set mode. (p. 43)
4-channel memory keyer is available for your conve-
nience. (p. 44)
t MICROPHONE CONNECTOR [MIC]
Accepts the supplied or optional microphone.
See p. 84 for appropriate microphones.
See p. 9 for microphone connector information.
y AF CONTROL [AF] (inner control)
Varies the audio output level from the speaker.
u MIC GAIN CONTROL [MIC GAIN]
Adjusts microphone input gain.
The transmit audio tone in SSB mode can be adjusted in
set mode. (p. 65)
How to set the microphone gain.
Set the [MIC] control so that the ALC meter sometimes
swings during normal voice transmission in SSB mode.
MIC GAIN
Recommended level for
an Icom microphone
IncreasesDecreases
AF RF/SQL
No audio output
Max. audio output
Decreases Increases
(dot)
(com)
(dash)
2
2
PANEL DESCRIPTION
TIMER
POWER
TRANSMIT
PHONES
ELEC-KEY
MIC
TUNER MONITOR NB NR
AF BAL NRRF/SQL
MIC GAIN RF POWER COMP BK-IN DELAY KEY SPEED
F-1 F-2 F-3 F-4 F-5
HF/50MHz TRANSCEIVER
i756PRO™
SSB
CW/RTTY
AM/FM FILTER EXIT/SET
q
w
e
r
t
!2!3!4!5!6
yi !1o
!0u
IC-756PROII.qxd 02.1.8 15:51 Page 2
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-756PROII wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info