Bedienungsanleitung Icom IC-FR9020 (Seite 2 von 20) (Englisch)

670412

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

R WARNING HIGH VOLTAGE! NEVER attach

an antenna or internal antenna connector during trans-

mission. This may result in an electrical shock or burn.

R WARNING HIGH VOLTAGE! NEVER install

the antenna at any place that person touch the an-

tenna easily during transmission. This may result in an

electrical shock or burn.

R WARNING! NEVER apply AC to the DC power

receptacle on the repeater rear panel. This could cause

a ﬁre or damage the repeater.

R WARNING! NEVER apply more than 16 V DC,

such as a 24 V battery, to the DC power receptacle on

the repeater rear panel. This could cause a ﬁre or dam-

age the repeater.

R WARNING! NEVER let metal, wire or other ob-

jects touch any internal part or connectors on the rear

panel of the repeater. This may result in an electric

shock.

R WARNING! The antenna (s) used for this trans-

mitter must be ﬁxed-mounted on outdoor permanent

structures with a separation distance of at least 6 me-

ters from all persons during normal operation. The

peak conducted output power at each antenna terminal

must not exceed 250 Watts and the peak radiated out-

put power must not exceed 1000 Watts EIPR. Users

and installers must ensure that FCC requirements for

satisfying RF exposure compliance are met. (See FCC

Rules Part 1, Sections 1307 and 1310)

CAUTION: NEVER expose the repeater to rain,

snow or any liquids.

DO NOT use or place the repeater in areas with

temperatures below –30°C (–22°F) or above +60°C

(+140°F). Be aware that temperatures can exceed

70°C (+158°F), resulting in permanent damage to the

repeater if left there for extended periods.

DO NOT place the repeater in excessively dusty envi-

ronments or in direct sunlight.

DO NOT put anything on top of the repeater. This will

obstruct heat dissipation. Place the repeater in a se-

cure place to avoid inadvertent use by children.

BE CAREFUL! The heatsink will become hot when

operating the repeater continuously for long periods.

BE CAREFUL! If a linear ampliﬁer is connected, set

the repeater’s RF output power to less than the linear

ampliﬁer’s maximum input level, otherwise, the linear

ampliﬁer will be damaged.

Use Icom microphones only. Other manufacturer’s

microphones have different pin assignments, and con-

nection to the repeater may damage the repeater.

Approved Icom optional equipment is designed for opti-

mal performance when used with an Icom repeater.

Icom is not responsible for the destruction or damage

to an Icom repeater in the event the Icom repeater is

used with equipment that is not manufactured or ap-

proved by Icom.

For U.S.A. only

CAUTION:

Changes or modifications to this

repeater, not expressly approved by Icom Inc., could

void your authority to operate this repeater under

FCC regulations.

IMPORTANT

READ THIS INSTRUCTION MANUAL carefully

and completely before attempting to operate the re-

peater.

SAVE THIS INSTRUCTION MANUAL—This in-

struction manual contains important safety and operat-

ing instructions for the IC-FR9010/FR9020 VHF/UHF

repeaters.

EXPLICIT DEFINITIONS

WORD DEFINITION

RWARNING!

Personal injury, ﬁre hazard or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, ﬁre or electric shock.

FORWARD

Thank you for purchasing this Icom repeater. The IC-FR9010/

FR9020

v h f /u h f p25 r e p e a t e r s are designed and built with

Icom’s state of the art technology and craftsmanship. With

proper care, this product should provide you with years of

trouble-free operation.

We want to take a couple of moments of your time to thank

you for making the

The IC-FR9010/FR9020

your repeater

of choice, and hope you agree with Icom’s philosophy of

“technology ﬁrst.” Many hours of research and develop-

ment went into the design of your

IC-FR9010/FR9020.

This manual covers up to ﬁrmware version 71MDV024 and

DSPV326.

PRECAUTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-FR9020 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info