q
w
e
■ Memory bank channel selection
Push [V/M] to select
memory
mode
.
Push [BAND] several times, or
while pushing and holding
[BAND], rotate [DIAL] to select
the desired bank group.
Rotate [DIAL] to select the de-
sired bank channel.
q
w
■ Call channel selection
Push [CALL] to select
call
channel mode
.
Rotate [DIAL] to select the de-
sired call channel.
• Push [CALL] again or push [V/M] to
return to the previous condition.
q
w
e
r
■ Memory channel programming
Set the desired frequency and
other functions in
VFO mode
.
Push and hold [V/M] for 1 sec.
to enter
select memory write
mode
.
• 1 short and 1 long beeps sound.
Rotate [DIAL] to select the de-
sired memory channel number.
Push and hold [V/M] for 1 sec.
again to program the contents
into the selected channel.
• 3 beeps sound.
q
w
e
■ Scan skip setting
Push [V/M] to select
memory
mode
.
Rotate [DIAL] to select the de-
sired memory channel.
While pushing and holding
[FUNC], push [V/M] to set the
skip setting (skip channel or
skip frequency) ON and OFF.
q
w
■ VFO scans
Push [V/M] to select
VFO
mode
.
Push and hold [CALL] for 1 sec.
• One of scan type “ALL,” “BAND” or
“PROG xx” (xx= 0–24) appears.
e
r
Rotate [DIAL] to select the de-
sired scan type. Push [CALL]
again to start the scan.
• Rotate [DIAL] to change the scan-
ning direction.
• During scan, push [V/M] to start auto
memory write scan.
Push [CALL] again to stop the
scan.
e
r
Rotate [DIAL] to select the de-
sired scan type. Push [CALL]
again to start the scan.
• Rotate [DIAL] to change the scan-
ning direction.
Push [CALL] again to stop the
scan.
q
w
■ Memory scans
Push [V/M] to select
memory
mode
.
Push and hold [CALL] for 1 sec.
• One of scan type “M ALL,” “B ALL,”
“B LINK” or “BANK” appears, if
memory banks are assigned.
