Bedienungsanleitung Icom RS-BA1 (Seite 56 von 58) (Englisch)

670304

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

TROUBLESHOOTING

NOTE:

If you could not solve the problem after trying the solutions described on the previous page, check the following

on the Base station side.

When connecting to the network through a PC

•Isthevolumeleveloftheaudiodevicetowhichtheradioisconnectedsettoanappropriatelevel?

•IsthereacheckmarkintheAF - Use box in the Radio Registration screen

(Server Setting mode ➔ Radio List screen ➔ [Properties])?

When connecting to the network directly

•Isthe“NetworkAF”itemssettoanappropriatelevelintheOtherssetmode?

Problem: The transmit audio cannot be output

- The description in this part is based on the assumption that the connection to the radio has succeeded (“<<CON-

NECT>>” is displayed under the radio name).

- To check the Remote station’s transmit IF signals, use the Transmit Monitor function with the Base station’s Re-

mote Utility, or place a receiver near the Remote station’s or Base station’s PC.

Possible cause 1

The microphone is not turned ON, or the input level is too low.

Solution

Turn the microphone ON and adjust the input level.

Possible cause 2

The appropriate audio device is not selected in the Remote Utility.

Solution

Select the appropriate audio device in the MOD Input Device menu in the Connection Setting screen

(Radio Operation mode ➔ Radio List screen ➔[Settings]).(pp.25,36)

If you connect a new USB audio device to your PC, the audio device which is selected as a default

device in your PC can be changed. If you select “Default Device” in the MOD Input Device menu,

please keep that in mind.

Possible cause 3

The input level of the audio device is set to too low on your PC.

Solution

Adjusttheinputleveloftheaudiodevice.(pp.5to8)

Possible cause 4

Audio input is disabled in the Remote Utility.

Solution

Insert a check mark in the MOD Transmission box in the Connection Setting screen

(Radio Operation mode ➔ Radio List screen ➔ [Settings]).

Possible cause 5

The input level is too low in the Remote Utility.

Solution

Adjust the input level in the Transmit Audio Adjustment screen

(Radio Operation mode ➔ Radio List screen ➔[MOD]).(p.37)

Possible cause 6

An incorrect connector is selected in the Remote Controller.

Solution

Select the proper radio’s connector which is connected to the Base station’s PC, in the MOD Select

(Remote ON)menuintheRemoteController’sMICSETscreen.(p.42)

NOTE:

If you could not solve the problem after trying the above solutions, check the following on the Base station side.

When connecting to the network through a PC

•Istheinputleveloftheaudiodevicetowhichtheradioisconnectedsettoanappropriatelevel?

•IsthereacheckmarkintheMOD - Use box in the Radio Registration screen

(Server Setting mode ➔ Radio List screen ➔ [Properties])?

When connecting to the network directly

•Isthe“NetworkMOD”itemssettoanappropriatelevelintheOtherssetmode?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom RS-BA1 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info